DSPPA MAG6701 Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Terminali a sfioramento DSPPA MAG6701. DSPPA MAG6701 4. 100v network terminal
Anche per DSPPA MAG6701: Manuale d'uso (20 pagine)

Stampa la pagina

MAG6701

100V Network Terminal

Description

MAG6701 100V Network terminal is a network full digital analog-digital signal conversion processor based

on TCP/IP communication protocol. Dual-network redundancy design makes it possible to any place where

there is network. Remote digital data flow could export audio signal through this device, which is controlled

by host. There is built-in MP3 player, USB interface and SD card interface. You could also play local MP3

program when there is no Network audio signal. It could execute timing function without host. There is one

audio input interface to connect with other audio equipment (such as DVD). There is one auxiliary audio

output interface to connect with other amplifiers to extend power. There is also a MIC interface to realize

local paging.

Features

 Dual-network redundancy design, able to work cross network segment

 Able to be installed to any place where there is network.

 Built-in MP3 player, with USB interface and SD interface to play local program

 Independent execution of timing function without host

 Support maximum 48kHz sampling rate, 16 bit digital audio decoding

 Built-in 1×60W high fidelity digital amplifier, low power consumption

 Able to play background music, emergency paging and alarm signal from system host

 One auxiliary audio input interface, one auxiliary audio output interface, two MIC input interfaces, one

EMC emergency output interface and one short circuit output

 Controllable volume and playing status of local output

 LED indicator to show signal status, working status and information change

 Support infrared remote control

 Could set priority of audio source through Network

[email protected]

www.dsppatech.com

The specifications will be subject to change without prior notice.