Atten TPR3005T Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Alimentazione Atten TPR3005T. Atten TPR3005T 4. Regulated dc power supply

Stampa la pagina

Thanks for using our products, please read this manual thoroughly before

operation.

OVERVIEW

MODEL:

TPR3003T/TPR3005T

including both stable voltage and stable current function,

circuit protection, thermal protection with load ability etc

laboratory, electronics, communications equipment maintenance, Product line, scientific research

and teaching units. If power working long hours running state, overheating will shut off the output,

when machine temperature returned to normal, output power restore default state. The machine

has perfect protection function, can protect user equipment are not consumed.

SPECIFICATION

1. Rated working conditions and external dimension

Input AC voltage

AC 220V 5%, Frequency 50Hz

(If according to the requirement can be designed in 110V 5% 60Hz)

The working conditions

Temperature rang: 0 ~40

Relative humidity less than 80%

Storage conditions

Temperature rang: -20 ~80

Relative humidity less than 80%

Shape dimension

(L)270 (W)125 (H)170mm

Accessories

users manual 1pc

power cable

1pc

2. Technical specification

Output voltage from 0 to 30V between nominal continuous adjustable.

Output current from 0 to nominal value between continuous adjustable.

Power regulation

CV less than 0.01 +1mV

CV less than 0.2 +1mV

regulated DC power supply is a high reliability,

Restricted current lower voltage, short

The power supply is suitable for the

Load regulation: CV less than 0.01 +5mV

CC less than 0.2 +5mA

CV less than 0.01 +7mV

CC less than 0.2 +7mA

Ripple and noise: CV 0.5mV

RMS

CC 3mA

RMS

(5Hz-1MHz)

CV 1mV

RMS

CC 5mA

RMS

Voltage accuracy:

0.5%rdg+2byte

Current accuracy:

0.5%rdg+2byte

Display resolution: 0.5%rdg+2byte

High voltage test:

Leakage current I 1 mA (Test conditions: 1700VAC/2s From the input

power to the ground, Input high AC voltage: 1700V, Time: 2 seconds).

Insulation resistance:

Insulation resistance more than 100M

From the input power to the ground, Input high DC voltage: 500Vdc, Time: 5 seconds).

INSTRUCTIONS

1. Note

(1) AC input

AC input should be 220V 10%, 50Hz

(If you are in the box 110V 10% 60Hz behind can indicate)

(2) Scattered heat

Do not exceed 40 degrees Celsius temperature environment in the local use, fan in the posterior

instrumentation, should have enough space, so scattered heat.

(3) Output voltage overshoot

When switching power supply device, the output voltage is not more than preset value.

(4) Overheating protection

This series of power is the perfect overheating protection function, can work under state

protection power will not lead to internal components overheating and burned power and user

equipment. If power transformer, internal temperature overheating will automatically cut off the

input voltage, When the internal temperature of power to the normal range, power will restore

default working state.

2. limiting Current Settings

(1)The decision to power instrument maximum safety.

(2)

Rotating voltage control knob, output voltage regulating 3V to 5V

Using a wire temporarily voltage output terminals (+) and (-) terminal circuit connection.

(3)

Rotating voltage control knob, until the CC designator light.

(4)

Adjust current knob to the current needs

load

(Test conditions: 500V /5s