Attero Tech AXON A4FLEX Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Accessories Attero Tech AXON A4FLEX. Attero Tech AXON A4FLEX 13. Networked audio connectivity interface

Stampa la pagina

Device Specifications

Audio Inputs (Mic/Line)
Connector Type
3.81mm Euro-block, 3 position (16-28 AWG)
Gain
-8 dB to +34 dB gain, 1 dB increments
Input Impedance
>2K ohms at any gain
Maximum Input Levels
-8 dB Gain, max input = +16.5 dBu (+24 dBu w/pad),
(Pad Active)
+34 dB gain = -25.5 dBu ( -17.5 dBu)
Phantom Power:
+48V, software selectable per channel
THD+N
<0.05% @ 1 kHz, -3 dBFS input. 20-20kHz
Frequency Response
20-20 kHz, +/- 1 dB (Line), 50-20kHz +/- 1 dB (Mic)
EIN
-125 dBu
Audio Line Outputs
Connector Type
3.81mm Euro-block, 3 position (16-28 AWG)
Maximum Output Levels
+24 dBu (-15.5 dBU w/pad)
(Pad Active)
Phantom Power:
+48V, software selectable per channel
THD+N
<0.05% @ 1 kHz, -3 dBFS input. 20-20kHz
Frequency Response
20-20 kHz, +/- 1 dB (Line), 50-20kHz +/- 1 dB (Mic)
Dynamic Range
100 dB
Speaker Outputs
Connector Type
5.08mm Euro-block 2-position (12-24 AWG)
Output Power
2 x 10 W (DC Input), 2 x 5W (PoE+) into 4 Ohms
THD+N
<0.5% @ max power (measured at 1kHz)
Frequency Response
20-20kHz
Connector Type
3.81mm Euro-block, 3 position
4 Inputs, 0 to 3.3V input voltage range, software
Logic Inputs
configurable for analog or digital operational modes
8 Outputs, 50mA sinking capability
Logic Outputs
(5V - 24V external supply),
10mA @ 3V sourcing capability
Connector Type
Mini USB-B
USB Audio Support
1x1, 2x2 USB Audi 2.0, 44.1/48k kHz, 16/24 bit
Logic I/O
USB Audio
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
Physical Layer
Ethernet
Connector (s)
Dual RJ-45
Cable Quality
CAT-5e or better, UTP
Transmission Speed
1 Gbps
AES67 Audio Network
Stream Amnouncement
SAP
Sample Rate
48 kHZ, 24 bit
Packet Times / Latency
1ms / <2ms receive latency
Power Specifications
PoE Power
802.3af/at Class 0
<8W, (typical quiescent power w/o amplification and logic
device attached)
Power Consumption
< 30W Max on PoE+, <12.95W on PoE
PoE, +24VDC on PWR LINK inputs or +24VDC on 2.1mm jack
(PoE and external DC can be used for redundancy)
Power Options
Physical Dimensions
Height
1.6"
Width
5.394"
Depth
7.88"
Weight
1.82 lbs.
Regulatory Compliance
FCC Part 15, Subpart B, Class A EMC
CE (EN55032 EMC / EN55035 ESD)
Certifications
WEEE
RoHS
REACH
Environmental Operating Specifications
Operating Temperature
0 to 40° C
Network
PoE pass-through supported w/software option on
Ethernet 2 port
Page ii