Attero Tech unDIO2X2Plus Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Attero Tech unDIO2X2Plus. Attero Tech unDIO2X2Plus 15. 2x2 dante interface

Stampa la pagina

1 – Overview

The unDIO2X2+ is a 2-in/2-out Dante audio interface. It's ideal for adding 2 channels of Dante audio I/O in a small,

unobtrusive form factor for installed sound applications. The two inputs use 3-pin de-pluggable connectors for balanced

or unbalanced I/O connectivity and support either mic or line level signals. Each input also features a 48V phantom power

option. The two outputs also use 3-pin de-pluggable connectors and each provides a balanced line level output. Each

output also features software adjustable volume control.

Connection to the Dante network is provided by a single Ethernet RJ45 connector on the back of the unit.

The unDIO2X2+ can be powered by a 24V DC wall wart (ordered separately) but it also supports the use of PoE instead.

This allows the unDIO2X2+ to be powered over the network cable from a suitable PoE source (IEEE802.3af). The PoE power

option is particularly useful if the unDIO2X2+ is mounted in a remote location where access to a mains outlet is limited

or indeed, nonexistent.

The unit comes in a small form factor with integrated mounting bracket allowing it to be mounted discretely in small

spaces (such as under desks) close to the sources or sinks thus reducing the amount of analog cabling that may be

required.

Audinate's Dante Controller or other 3rd party manufacturer's Dante routing software can be used to control the audio

routing configuration of the device while the Attero Tech unIFY Control Panel application can be used to configure the

device-specific features.

The unDIO2X2+ also supports control by third party systems allowing external configuration of its settings such as

phantom power and input gain in real time. Further information on 3

in section 4.

1.1 – What's in the Box

The unDIO2X2+ comes supplied with the following

unDIO2x2+ device

1.2 – Optional Extras

All of the following are available as options for the unDIO2X2+ that may be ordered separately:

A 24 V DC power supply is available if PoE power is not desired or available – P/N: 900-00175-01

 Attero Tech LLC 2018

Figure 1 - unDIO2X2+ front and back

Page 4

party control can be found later in this document

614-00037 Rev 01_b