3onedata IES2010 Series Manuale di installazione rapida - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione rapida per Interruttore 3onedata IES2010 Series. 3onedata IES2010 Series 2. Unmanaged industrial ethernet switch
Stampa la pagina
Insert a little to the bottom, lift upward and then insert
to the top.
Step 3
Check and confirm the product is firmly installed on
DIN-Rail, and then mounting ends.
【Disassembling DIN-Rail】
Step 1
Power off the device.
Step 2
After lift the device upward slightly, first shift out the
top of DIN-Rail mounting kit, and then shift out the
bottom of DIN-Rail, disassembling ends.
Attention before powering on:
Power ON operation: first connect power line to the
connection terminal of device power supply, and then
power on.
Power OFF operation: first unpin the power plug, and
then remove the power line, please note the operation
order above.
【Power Supply Connection】
DC power supply
This series provide 4 pins power input
terminal blocks and two independent DC
power supply systems of PWR1 and PWR2.
Power supply range: 12~48VDC
【Checking LED Indicator】
The function of each LED is described in the table as below:
LED
Status
Description
Power supply is connected and
ON
running normally
PWR
Power supply is disconnected
OFF
and running abnormally.
Ethernet port connection is
ON
active.
Link/ACT
Blinking
Data transmitted
(1-10)
Ethernet port connection is
OFF
inactive.
10M/100M
100M operating mode
ON
(only suit for
(100Base-TX)
100M
10M operating mode
copper port
OFF
(10Base-T)
of model II)
【Specification】
Panel
Gigabit SFP
1000Base-SFP, SFP slot
10/100Base-T(X) self-adapting
RJ45 port, full/half duplex
100M copper port
self-adaption, support
MDI/MDI-X self-adaption
100Base-FX, optional SC/ST/FC
100M fiber port
port
Power indicator, interface
Indicator
indicator and operating mode
indicator
Exchange attributes
Backplane bandwidth
7.6G
Packet buffer size
1Mbit
MAC table size
8K
Power supply
Input power supply
12~48VDC
4 pins 7.62mm pitch terminal
blocks
Access terminal
Support dual power supply
redundancy and anti-reverse
connection
Consumption
≤ 5.9W@24VDC
No-load
≤ 7.3W@24VDC
Full-load
Environmental Limits
Working temperature
-40~75℃
Storage temperature
-40~85℃
Working humidity
5%~95% (no condensation)
Protection grade
IP30 (metal shell)