DT Research DT340T Manuale operativo di base - Pagina 3
Sfoglia online o scarica il pdf Manuale operativo di base per Tavoletta DT Research DT340T. DT Research DT340T 4. Rugged tablet
Anche per DT Research DT340T: Manuale operativo di base (4 pagine), Manuale operativo di base (4 pagine)
Stampa la pagina
OPERATION
Powering ON and OFF
To activate the DT340T, push and quickly release the Power Button. The display will come on
in a few seconds. To put the DT340T in Standby mode, push and quickly release the Power
Button. To turn the DT340T off for extended storage, power off safely using any software
function that "shuts down computer" provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT340T when setting up for the first time to fully
charge the battery packs. You may charge the battery packs while attached to the
DT340T, or with the optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT340T a few
times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in "Standby" mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface
will be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT340T may be configured using the utilities and methods dictated by the software
operating system. The DT340T should be configurable for various properties such as user
profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT340T is often delivered with an embedded (user-inaccessible) 802.11ac WLAN
adapter equipped with a hidden custom antenna.
• hrough the support of typical WLAN adapters, the DT340T should be able to detect
T
all 802.11 access points in the vicinity for you to select the access point of your
choice for connection.
• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT340T and the
T
access points have to match. The SSID is case-sensitive and it is recommended that
you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
•
W
hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
settings such as Authentication mode, etc.
• efer to the access point operating manuals for setting up the 802.11 access points.
R
5
ENGLISH