DT Research DT372 Manuale operativo di base - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo di base per Tavoletta DT Research DT372. DT Research DT372 4. Mobile pos tablet

Stampa la pagina

DT372

Bluetooth

The DT372 features a built-in Bluetooth adapter that operates on the Microsoft

Windows Bluetooth protocol. The Bluetooth conﬁguration application is invoked from

the System Tray or from the Control Panel for Windows XP. Follow the instructions and

options provided within the application to conﬁgure and invoke Bluetooth connectivity

with the corresponding peripherals.

NOTE: Bluetooth devices or accessories that are not compatible with the Microsoft

Windows Bluetooth protocol may not work with the DT372.

Button Management

Where supported by software, many of the hard buttons on the DT372 are

programmable to perform a function of the user's choice. The exception is the Power

Button and the SAS Button. To activate the button re-assignment application, invoke the

Button Manager application, e.g., in Windows XP Embedded

Brightness Control

Where supported by device ﬁrmware and software, a hard button may be engaged to

manipulate the display brightness. Press the System Menu button (Button 7) on the front

of the DT372. The System screen will display a Brightness control section with up and

down arrows that can be activated with the stylus.

Battery and Power Management

The DT372 is equipped with an internal 3760mAh Li-Ion battery pack that is capable

of supporting approximately 3 - 4 hours of continuous operation. The period between

battery recharges can be signiﬁcantly lengthened by putting the device into Standby

mode through the Power Button (see Buttons Function Table) whenever the device is

not in use. Depending on the operating software, the DT372 may also be conﬁgured to

enter various power-saving modes via the Power Button or through timed entry.

ENGLISH

Desktop Cradle

The DT372 is complemented by an optional Desktop Cradle for support, pass-through

charging, and connection to a range of USB peripherals, including keyboard and mouse.

The Cradle oﬀers the following interfaces: a DC-in port for the AC-DC adapter, an

Ethernet port, and USB ports. Always seat the DT372 securely onto the cradle. The cradle

must be powered by the AC-DC adapter for the Ethernet and USB ports to function. The

battery packs on the DT372 may be recharged by connecting the AC-DC adapter directly

to the DC-in port on the DT372 or through the DC-in port on the Desktop Cradle while

the DT372 is docked to the Cradle.

USING THE DT372

Memory & Storage conﬁguration

The DT372 is available with 2GB memory conﬁguration. Storage options currently range

from 2GB to 32GB ﬂash memory.

Peripherals Support

Through its USB ports, the DT372 supports a wide range of USB-based peripherals.

These peripherals are applicable for software installation, applications storage, data

storage, and system software recovery and updates. The DT372 is also compatible with

custom mountable cradle options. These securable and mountable cradles provide an

interface to VESA mounts and arms, and to ports that may include USB, Ethernet and

pass-through power.

ENGLISH