DT Research WebDT 312 Manuale operativo di base - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo di base per Tavoletta DT Research WebDT 312. DT Research WebDT 312 4. Mobile pos tablet
Anche per DT Research WebDT 312: Manuale operativo (6 pagine)

Stampa la pagina

WebDT 312

Button Management

Where supported by software, many of the hard buttons on the WebDT 312 are

programmable to perform a function of the user's choice. The exception is the Power

Button and the SAS Button. To activate the button re-assignment application, invoke the

Button Manager application, e.g., in Windows XP Embedded

Brightness Control

Where supported by device ﬁrmware and software, a hard button may be engaged to

manipulate the display brightness. Press the System Menu button (Button 7) on the front

of the WebDT 312. The System screen will display a Brightness control section with up

and down arrows that can be activated with the stylus.

Battery and Power Management

The WebDT 312 is equipped with an internal 2200mAh Li-Ion battery pack that is capable

of supporting approximately 1.5–2 hours of continuous operation. With the optional

internal 3760mAh battery and an external battery pack that clips (hot-pluggable)

onto the back of the device, the maximum period of continuous operation will be

approximately 3–4 hours. The period between battery recharges can be signiﬁcantly

lengthened by putting the device into Standby mode through the Power Button (see

Buttons Function Table) whenever the device is not in use. Depending on the operating

software, the WebDT 312 may also be conﬁgured to enter various power-saving modes

via the Power Button or through timed entry.

Desktop Cradle

The WebDT 312 is complemented by an optional Desktop Cradle for support, pass-

through charging, and connection to a range of USB peripherals, including keyboard and

mouse. The Cradle oﬀers the following interfaces: a DC-in port for the AC-DC adapter, an

Ethernet port, a VGA port (optional) and USB ports. Always seat the WebDT 312 securely

onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet

and USB ports to function. The battery packs on the WebDT 312 may be recharged by

connecting the AC-DC adapter directly to the DC-in port on the WebDT 312 or through

the DC-in port on the Desktop Cradle while the WebDT 312 is docked to the Cradle.

USING THE WebDT 312

Memory conﬁguration

The WebDT 312 is available with 1GB or 2GB memory conﬁgurations. Storage options

currently range from: 2GB to 16GB ﬂash memory or 32GB to 128GB SSD.

ENGLISH

Peripherals Support

Through its USB ports, the WebDT 312 supports a wide range of USB-based peripherals.

These peripherals are applicable for software installation, applications storage, data

storage, and system software recovery and updates. The WebDT 312 is also compatible

with custom mountable cradle options. These securable and mountable cradles provide

an interface to VESA mounts and arms, and to ports that may include USB, Ethernet, and

pass-through power.

Remote Management

Depending on software conﬁguration, the WebDT 312 can be centrally managed for

asset monitoring and for software control. Please consult your device provider.

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment oﬀ and on, the

user is encouraged to try to correct the interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit diﬀerent from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with

any other antenna or transmitter.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

ENGLISH