DT Research DT395CR Manuale operativo di base - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo di base per Terminali a sfioramento DT Research DT395CR. DT Research DT395CR 10. Mobile pos tablet
Anche per DT Research DT395CR: Manuale operativo di base (4 pagine), Manuale operativo di base (4 pagine)

Stampa la pagina

DT395CR

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service representative.

Please contact your product and/or service provider for internal battery replacement service.

Powering ON and OFF

To activate the DT395CR, push and quickly release the Power Button. The display will come on in a few

seconds. To put the DT395CR in Standby mode, push and quickly release the Power Button. To turn the

DT395CR off for extended storage, power off safely using any software function that "shuts down computer"

provided in the software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the AC-DC

adapter with the DT395CR when setting up for the first time to fully charge the battery pack.

You may charge the additional battery pack with it attached to the DT395CR, or with the

optional external battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the Battery LED will be solid orange, and when

fully charged, the light will be off. If plugging in the AC-DC adapter does not initiate charging,

the battery pack(s) may be substantially drained. Try unplugging/ replugging the AC-DC

adapter to the DT395CR a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the tablet in

"Standby" mode while not in use. Pushing briefly on the same button will wake up the system

within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet—this form of

hardware shutdown is intended to be a means of recovery from lockups, and not as normal

operation.

ENGLISH