DT Research DT311 Manuale operativo di base - Pagina 4
Sfoglia online o scarica il pdf Manuale operativo di base per Caricabatterie DT Research DT311. DT Research DT311 11. Battery charger kit
Anche per DT Research DT311: Manuale operativo di base (2 pagine)
Stampa la pagina
OPERATION
Internal Battery
!
Warning!
The Internal battery pack should only be replaced by an authorized DT Research service representative.
Please contact your product and/or service provider for internal battery replacement service.
Powering ON and OFF
To activate the DT311, push and quickly release the Power Button. The display will come on in a few seconds.
To put the DT311 in Standby mode, push and quickly release the Power Button. To turn the DT311 off for
extended storage, power off safely using any software function that "shuts down computer" provided in the
software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the AC‐DC
adapter with the DT311 when setting up for the first time to fully charge the internal battery
pack. You may charge the external battery pack with it attached to the DT311, or with the
optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue‐colored Battery LED should blink slowly. If
plugging in the AC‐DC adapter does not trigger this blinking activity and the LED stays dark,
the battery pack(s) may have been drained substantially. Try unplugging/ replugging the
AC‐DC adapter to the DT311 a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the tablet in
"Standby" mode while not in use. Pushing briefly on the same button will wake up the system
within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet—this form of
hardware shutdown is intended to be a means of recovery from lockups, and not as normal
operation.
4
ENGLISH