DT SWISS Ratchet LN Manuale tecnico - Pagina 12

Sfoglia online o scarica il pdf Manuale tecnico per Accessori per biciclette DT SWISS Ratchet LN. DT SWISS Ratchet LN 19.
Anche per DT SWISS Ratchet LN: Manuale tecnico (16 pagine)

Stampa la pagina

2.10 MOUNTING THE BALL BEARING AT THE DRIVE SIDE

1. Grease the bearing seats and the thread of the ring

nut with universal grease.

2. Put the installation cylinder into the vise.

3. Insert the long side of the axle into the installation

cylinder.

4. Place the hub shell onto the tool and the axle.

5. Push a new bearing on the hub shell with the

colored side facing outwards.

6. Put the installation cylinder onto the bearing.

7. Tap in the ball bearing carefully with slight hammer

strokes.

8. Remove the installation cylinder from the hub.