Attop F16 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Droni Attop F16. Attop F16 16.

5.Geomagnetic calibration

After the gyroscope calibration is completed, the next step is geomagnetic calibration, press and keep the

gyroscope / geomagnetic calibration button for 2 seconds, and the tail light of the aircraft flashes into

the geomagnetic calibration. And then, take the aircraft and rotating horizontally 3-5 circles.

After the remote control handle emits a "beep" sound, then rotating the aircraft vertically, the remote control handle

emits a "beep...." sound again, and the calibration is successful.

6.One key takeoff / landing

Long press:emergency stop

GPS Mode (screen show "GPS ON"):

After searched 12 GPS signals and pushing the Left stick to

the lowest left corner, and meanwhile push the right stick

to the lowest right corner (Pic 1), then the motors of the

drone start rotating. And now press one key take off buttom (Pic 2),

then the drone will be taking off.

Indoor Mode: After frequency pairing between drone and

remote control and then long press the Indoor mode buttom (Pic 3)

to change to Indoor mode (screen show "GPS OFF").

Next, push the Left stick to the lowest left corner, and meanwhile push

the right stick to the lowest right corner (Pic 1), then the motors of the

drone started rotating. And now press one key take off buttom (Pic 2),

then the drone will take off.

Emergency stop: Long press one key take off buttom (Pic 2) to activate emergency stop when the

drone flight altitude not higher than 2m .

Note： 1. In GPS mode, one key landing function could be activated when the

drone flight altitude not higher than 10m, the flight distance not longer than 5m.

2. The drone will power off automatically after 8 mins when motors not any

woking.

3. The remote control will power off automatically after 20 mins when not

any action.

Stay away from the

rotating propellers and

motors.

Long press:Geomagnetic calibration

(Pic 1)

(Pic 2)

(Pic 3)