dtec DYNertia3 Manuale di avvio rapido - Pagina 8

Sfoglia online o scarica il pdf Manuale di avvio rapido per Strumenti di misura dtec DYNertia3. dtec DYNertia3 20.

DYNertia3 Quick Start (Inertia- Chassis type)

Two Main DYNertia3 Windows (DYNO / GRAPH)

Press the "DYNO" / "GRAPH" button to change between the 2 main Windows of DYNertia3.

The 'DYNO' Window is used to select and create files, enter the weather details, record vehicle test data, 'teach' gear

ratios, view RPM/speed and control the testing.

This Window is only visible when the control unit is connected, powered and 'Linked'.

Note:

The 'GRAPH' Window displays the Power and Torque as traces that can be overlayed and analysed. Traces from a test

Run can be selected, loaded from file and compared.

Note:

The DYNertia3 Window does not size itself to the PC screen, if you wish you can adjust your PC screen resolution

to best suit (Program Window size is1024 x 768)

www.dtec.net.au

Note:

The Row of gauges (input channel

data) shown along the bottom of the

screen are visible with a single monitor.

With duel monitors this data is displayed

on the second monitor instead and

replaced with the test 'comments' field

(also found in 'View' menu).

Note: The 'Setup' menus (and most

menus) discussed in the following pages

are only accessible from this GRAPH

screen (they are 'greyed' out in DYNO

screen)

Note:

The RPM/Speed button makes

the software use either units of RPM or

speed (e.g. kph) for the controls,

displays and graphs.

Note:

When test Runs are visible on the

graph we refer to them as 'traces'.