Attwood 3540 Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Illuminazione marina Attwood 3540. Attwood 3540 4. 3500 series stainless steel 1nm and 2nm sidelights, led bicolor combination bow light, led sidelight pair
Stampa la pagina
CAUTION
Polarity is important. If wiring is mis-connected the LED light will
not operate.
1. Connect wires to fused power source: (See Figure 3).
• Connect the (-) black wire to the negative (-) wire from the
12-volt supply.
• Connect the (+) gray or red wire along with proper fuse and
switch to the positive (+) 12-volt supply.
• Fuse must be 1-amp.
2. Note that navigation rules require sidelights to be operated
separately from anchor lights. Use either two switches or a
single switch with three positions for off/anchor/running.
Figure 3
1-Amp Fuse
(pos)
(neg)
12V DC
Green
(Starboard)
ATTWOOD LIMITED 10-YEAR WARRANTY
Because of the longevity of Attwood's LED lighting technology,
Attwood offers a limited 10-year warranty on this LED lighting
product. See Product Catalog or attwoodmarine.com for details.
© 2007 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com
Switch
(pos)
Red
(Port)