DTF Seismo 11 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Asciugatrice DTF Seismo 11. DTF Seismo 11 7. Powder applicator & dryer

• Wind the media to the paper tube of the take up winder.

Attention: please ensure that the cloth is smooth and there

are no folds. The edge of the cloth should be level on both

sides of the machine (front & back).

6. Temperature Setting

• Press

displays the data. Then press

instrument will display the parameters.

• Start heat when the setup of temperature appear on

the screen. Press

• First press

• Press

for checking.

• The above temperature settings are set according to

the actual dissolution degree of powder and the

deformation degree of the film. It is acceptable to dry

until the powder can dissolve and the film does not

deform. It is recommended to adjust the upper drying

temperature in the unit of 5°C until the powder

dissolves.

• Disconnect the external power supply when repairing

or cleaning the machine.

• After using the machine, clean the residual powder on

the wall of the powder shaking chamber every day.

• Clean the powder shaking film.

• Clean the remaining powder of the panel.

• Clean the powder on the positioning shaft.

and hold for 2 seconds. Lift after screen

then press

and hold to return to the last parameter

again. The

to reset the parameters.

to quit setup.