Attwood 6126 Istruzioni per il montaggio

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Pompa dell'acqua Attwood 6126. Attwood 6126 1. Attwood potable water pump installation instructions

Stampa la pagina

Potable Water Pump

6126

Mounting Instructions

SAVE THESE INSTRUCTIONS

Form Number 69239 Rev. B

FEATURES:

The Potable Water Pump is a rugged, small sized fresh water

pump used to deliver water to a faucet. Ideal for use with the

Attwood 6142 Faucet/Hand Pump. It is made of ABS non-corro-

sive FDA approved plastic. Meets U.S. Coast Guard Safety

Standards Sections 33 CFR 183.410 and 183.425. Listed by the

International Association of Plumbing and Mechanical Officials

(IAPMO).

Attwood marine hardware, navigation lighting, interior lighting, bilge

pumps, and other marine accessories are specified more than any

other brand by America's best-known boat manufacturers as original

equipment. Look to Attwood for quality replacement parts and add-on

marine accessories.

CAUTION:

The Potable Water Pump is designed to pump fresh,

potable water only. It must not be used to pump gasoline

or other flammable liquids.

TOOLS AND MATERIALS REQUIRED:

1. Drill and suitable drill bits.

2. Screwdriver.

3. Wire strippers.

4. Four (4) wire connectors or equivalent.

5. One (1) in-line fuse holder with 2 amp fuse.

6. Two (2) #10 panhead screws (length must not protrude

through deck).

7. Suitable length of 3/8" I.D. hose for pump to tank and pump

to faucet.

8. Four (4) stainless steel screw-adjustable hose clamps.

9. Additional wire, if needed, in 16 or 18 gauge size.

INSTALLATION INSTRUCTIONS:

1. Select a suitable location for this pump, keeping in mind that

it must be a dry area.

The pump has intake and outlet fittings to fit 3/8" I.D. soft

plastic tubing or 1/4" female pipe thread (cut off hose barb if

necessary). Teflon

plumbers tape must be used for all

threaded connections and hose clamps for all tubing con-

nections.

NOTE: This product is designed to be used with the Attwood

6142 3-Way Electric Faucet which includes an integral ON/OFF

switch. However, it may also be used with any 12 volt DC water

system with an ON/OFF switch rated for 2 amps (or more) serv-

ice providing that the recommended 2 amp fuse is also used.

2. After installing the pump, connect the pump's black lead wire

directly to the 12 volt battery negative (-) connector. Connect

the pump's brown wire lead to one wire of an in-line fuse

holder and connect the other fuse holder wire to one lead

wire from the Electric Faucet. Connect the other Electric

Faucet lead wire directly to the 12 volt battery positive (+)

connector. (See Figure 1). Added wire must be 18 gauge or

larger.

An optional power ON/OFF switch, such as Attwood 7589 or

7563, may be installed as a master switch as shown in Figure 2.

03-11

The pump may be threaded directly into the tank. However,

this is a centrifugal pump and must be positioned lower than

the source of water to operate. Do not install on a surface

higher than the bottom of your fresh water supply tank.

NOTE: When installing, outlet nozzle should always be higher

than inlet nozzle. (See Figure 3)

WIRE CONNECTORS

BROWN

CITY WATER

CONNECTION

30-40 PSI

PRESSURE

LIMITING

VALVE

WIRE

CONNECTORS

BLACK

12 VOLT

BATTERY

MASTER SWITCH

INSTALLATION

BROWN

BATTERY

BLACK

Attwood 6142

3-WAY ELECTRIC FAUCET

FUSE AND

HOLDER

CHECK TEE

VALVE

WATER SUPPLY TANK

Attwood 6126

POTABLE WATER PUMP

FIGURE 1

OPTIONAL

BLACK

Attwood

7589 or 7563

SWITCH

TO POTABLE

WATER PUMP

FIGURE 2

INLET

OUTLET BELOW INLET

INCORRECT

FIGURE 3

CAUTION:

This product is not water resistant and must be installed

in a dry location.

Do not use synthetic rubber sealant (Silicone, RTV, etc.) or

any sealant which smells like vinegar to seal the pump or

its fittings. Use of these materials may cause the pump to

crack. It is best to use plumbers Teflon

required.

CAUTION:

ALWAYS protect the pump and the wiring with a 2 amp

fuse. For 12 volt DC use only.

ATTWOOD LIMITED WARRANTY

BILGE PUMPS

ATTWOOD CORPORATION, 1016 North Monroe, Lowell, Michigan

49331, ("Attwood") warrants to the original consumer purchaser that

this Attwood Potable Water Pump will be free from defects in materials

and workmanship under normal use and service for a period of one (1)

year from the date of original consumer purchase. This warranty does

not extend to any batteries or fuses used with the pump. This limited

warranty is not applicable if the pump has been damaged by accident,

improper installation, unreasonable use, lack of proper maintenance,

unauthorized repairs or modifications, or other causes not arising out of

defects in materials and workmanship.

Attwood's obligations under this warranty are limited to repair of the

product at Attwood's plant or replacement of the product at Attwood's

option and at Attwood's expense. Any expenses involved in the removal,

reinstallation, or transportation of the product are not covered by this

warranty. The product must be returned to Attwood's plant at the address

indicated above, postage prepaid, with proof of original purchase,

including date. If Attwood is unable to replace the product and repair is not

commercially practicable or cannot be timely made, or if the original

consumer purchaser is willing to accept a refund in lieu of repair of

replacement, Attwood may refund the purchase price, less an amount for

depreciation. The acceptance by Attwood of any product returned or any

refund provided by Attwood shall not be deemed an admission that the

product is defective or in violation of any warranty.

This warranty is Attwood's only express warranty of this product. No

implied warranty shall extend beyond one (1) year from the date of

original consumer purchase. Attwood shall not be liable for any damages

for loss of use of this product, nor for any other incidental or consequen-

tial damages, costs or expenses.

Some states do not allow limitations on how long an implied warranty lasts

or the exclusion or limitation of incidental or consequential damages, so

the above limitations and exclusions may not apply to you. This warranty

gives you specific legal rights, and you may also have other rights which

vary from state to state.

1016 N. Monroe Street, Lowell, MI 49331-0260

OUTLET ABOVE INLET

INLET

CORRECT

tape where