AirTrack Factory AirFloor Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Sport e attività all'aperto AirTrack Factory AirFloor. AirTrack Factory AirFloor 7.
Anche per AirTrack Factory AirFloor: Manuale d'uso (12 pagine)

Stampa la pagina

P L A Y I T S A F E

The thickness of an AirProduct has an effect on how the product can be used. Most of our products

for home use are 10 cm thick. This goes for the AirFloors, AirBeams, and AirBoards.

The pressure in the product needs to be high enough to prevent you from hitting the floor and soft

enough for a comfortable bounce. We recommended pressures for our home products, but in the

end it's up to the users' preferences.

Recommended pressure

Body weight

10 cm thick

20 - 30 kg

70 - 80 mbar

30 - 60 kg

70 - 100 mbar

60 - 90 kg

100 - 140 mbar

90+ kg

150 mbar

The bounciness of the AirProduct depends on the pressure. If filled up to the maximum pressure, an

AirProduct can feel like a standard gymnastics floor (which is useful for competition training). At low

pressure the AirProduct feels nice and soft, but be careful to not bottom out!

Note: It is impossible to over-pressurize an AirProduct with the blowers we supply. To prevent

damaging the AirProduct, never use a blower other than the one supplied with your equipment.

20 cm thick (P2)

30 cm thick (P3)

40 - 50 mbar

30 - 40 mbar

40 - 60 mbar

60 - 70 mbar

75 mbar

S A F E T Y R U L E S

These instructions apply to all inflatable products from AirTrack Factory that can be used at home as well

as in a gym. These products will be referred to as 'AirProducts' or the 'equipment'.

Important: This product is not a toy. It is professional training equipment for gymnastics, cheerleading,

tumbling, school sports, showgroups, martial arts, parkour, freerunning and tricking.

USE AIRPRODUCTS ONLY FOR THEIR INTENDED PURPOSE

Personal

• This equipment is not suitable for children under

5 years.

• Do not allow more than one person at a time to

use the AirProduct.

• Do not wear shoes while on an AirProduct for

they may damage the surface.

• Do not jump or land closer than 20 cm to a valve.

• Consult an instructor prior to use.

• Use equipment only under the supervision of

trained and qualified instructors.

• Use equipment with trained spotters and the

proper spotting equipment.

• Follow a progressive learning pattern. Assure

basic skills are achieved before attempting more

advanced skills.

Positioning and set-up

• Do not bring any sharp items on or close to the

AirProduct.

• Never place an AirProduct near overhead

obstructions, such as low ceilings, trees or power

lines, nor place the equipment on a slope greater

than 5%.

• The area on which the AirProduct is placed must

be clean, dry, flat and free of obstacles and walls.

• Always set up the AirProduct in the same area

where you will be using it. Do not drag or throw it.

Lift it by the handles and avoid scraping.

• Do not use the AirProduct in humid areas,

electrocution may occur.

Pressure

• Do not use a compressor. Use only inflation

equipment supplied by AirTrack Factory.

• Check the air pressure of the AirProduct before

each training session.

• Assure that the AirProduct has sufficient air

pressure to avoid bottoming out. Recommended

air pressure levels can be found in this user

manual.

• Use equipment only when all hard exposed

surfaces are protected with proper mats.

www.airtrackfactory.com - [email protected] - Tel. +31 (0)24 89 09 659

Outdoor

• When setting up the AirProduct outdoors, use a

groundsheet to avoid damaging the AirProduct.

• Do not expose AirProducts to heat, including heat

from exposure to the sun.

• Never leave an AirProduct outside unattended

and keep the air pressure under the maximum

values found in this guide.

• Do not use the AirProduct in the rain or snow.

While inflating the equipment, electrocution may

occur and also the surface will be slippery which

can cause injuries.

• The AirProduct is not a flotation device.

Maintenance

• Never pack, store or transport the AirProduct

when it is moist or dirty.

• The AirProduct can be cleaned with water and

soft soap. Do not use industrial cleaning

products.

• Do not use the AirProduct when it's damaged,

leaking or when parts are worn or missing.

Warnings

• Be aware that AirProducts are not designed as

landing mats.

• AirProducts may move during use which could

result in serious injury.

• Serious injury (including permanent paralysis

or death) could result from any activity involving

motion, rotation or height.

• All users of this equipment v of

serious injury.

• Mats cannot and do not eliminate hazards.