Comtek COM-40VA Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Antenna Comtek COM-40VA. Comtek COM-40VA 8. Vertical antenna

6. Install the Black Vinyl Cap on the top element.

7. The two stainless steel V-Bolt Clamps are used to

secure the mounting plate to the customer supplied

mounting pipe described earlier in this manual. When

the antenna is installed on the mounting pipe, tighten

the V-Bolts evenly so the length of the exposed

threads is approximately equal. Any V-Bolt should be

tightened evenly from side-to-side with an equal

amount of thread above each nut.

8. Connect the center conductor of your coaxial feedline

to the studded band clamp. The shield from your

coaxial feedline must connect to the base plate where

you connect your radial wires.

Frequency MHz

7.000

7.125

7.175

7.300

Approximate Overall Length

34 Feet 5 inches

32 Feet 10 inches

32 Feet 7 inches

33 Feet 3 inches

COMTEK 40 Meter

Vertical Antenna

Assembled Diagram

Figure 1

- 6 -