Comtrend Corporation PG-9141s Manuale di installazione rapida - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione rapida per Adattatore Comtrend Corporation PG-9141s. Comtrend Corporation PG-9141s 7. Powerline ethernet adapter with wifi
Stampa la pagina
B. Device Connection
These steps show how to connect a PowerGrid 9142s to a network
device. Below we use an Ethernet camera as a network device.
1. Plug a PowerGrid 9142s unit into the power outlet closest to the
camera or other device. The Power LED on the PowerGrid
9142s should light up GREEN.
2. Power on your camera (or Ethernet device). Connect the
PowerGrid 9142s to the camera with an Ethernet cable. The
ETHERNET LED on the PowerGrid 9142s should light up
GREEN.
3. The Status LED on thePowerGrid 9142s(s) should now be RED,
GREEN
or ORANGE.
4. If the Status LED is off, press the "Config" button on each of the
two PowerGrid 9142s and 9141s devices for 2-11 seconds. Upon
successful connection of the PowerGrid 9141s, the STATUS LED will
light up.
5. If the connection process is not successful, please refer to the
trouble shooting steps in section D.
C. Adding a New Device
Follow steps 1-4 in Part B to add additional PowerGrid 9142s devices to
the network. Press the "Config" button on the new device and one
other PowerGrid device in the network so they can pair and transmit
data successfully.
Page 3