ABSTRACT ClubColour Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Attrezzature per DJ ABSTRACT ClubColour. ABSTRACT ClubColour 19.

Abstract Universal Instruction Manual

2-channel stand alone light show

To add further interest to the light show you can set each unit to either follow

the first unit or to do something in contrast to the first unit. For example, if you

have four units, two on the right and two on the left, you might want to set the

outside two units to do one thing, and the middle two to do a variation on the

same theme.

Set dip switch 10 'off' to make the scan work the same and 'on' to select the

variation. Even if you only have two units you will probably find that you get a

better light show if you set dip switch 10 'on' on the second unit.

On non-Club range units, dip switch 10 has no effect on the first unit in the

line. It is always assumed to be "off" for the first unit.

If you are using Abstract CE-range products with Club products, make sure one

of the Club products is first in the DMX line, because the Club products have

"Supersound" stand alone mode which produces a better light show. The

Twister 4 and Galactic Star also have "Supersound" but the other products do

not.

Special options in stand alone mode

In stand alone mode, you can also set three options which affect the way the

unit produces its light show, by setting the other 9 dip switches (1-9):

All dip switches on: Display mode - unit ignores audio and scans slowly

through various patterns (including strobes)

1 off, 2-9 on: Slow mode - unit responds to audio but always moves slowly

and gently. No strobing is used

1 on, 2 off, 3-9 on: Strobe disable mode - unit behaves as for normal

stand-alone mode but will not use strobing.

These options only need to be set on the first unit in the DMX line if several

units are connected together. You can set the switches before or after the unit

is turned on.

If you connect a DMX source while these special options are set, the unit will

have a start channel of 1.

Page 6