AU Speed Wi-Fi Home L01 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Modem AU Speed Wi-Fi Home L01. AU Speed Wi-Fi Home L01 2.
Stampa la pagina
■ For Nintendo 3DS LL/3DS
From the menu screen, "本体設定 (Settings)" → "はじめる (Start)" → "インターネッ ト設定 (Internet settings)" →
"インターネッ ト接続設定 (Internet connection setting)" → "接続先の登録 (Saving access point)" → "自分で設定
する (Set manually)" → "アクセスポイン トを検索 (Search access points)"
■ For Nintendo DSi LL/DSi
From the menu screen, "本体設定 (Settings)" → "インターネッ ト (Internet)" → "接続設定 (Connection settings)"
→ Select any one of "未設定 (Not set)"
■ For smartphone (Android OS device)
From the menu, "Settings" → "Wi-Fi" → Turn on Wi-Fi
■ For iPhone/iPod touch/iPad/iPad mini
From the Home screen, "Settings" → "Wi-Fi" → Turn on Wi-Fi
From the displayed network list etc., select SSID of the product
Enter the security key (password)
• Confirm that connection with the product is complete on the display etc. on the wireless LAN (Wi-Fi
In "Manual setting" screen of the product, "Next" → Tap "OK"
The Home screen reappears.
Connecting WPS compatible wireless LAN (Wi-Fi
If your wireless LAN (Wi-Fi
®
) device is compatible with WPS function, the wireless LAN (Wi-Fi
connected with simple steps.
■ Connecting with 2.4 GHz band
Press and hold the WPS button for within one to five seconds
WPS function is enabled and the Status indicator blinks quickly in green.
Perform the WPS connecting procedure on a wireless LAN (Wi-Fi
approximately 2 minutes
When the setup is succeeded, the Status indicator lights in green.
• Procedure varies by your wireless LAN (Wi-Fi
®
) device.
■ Connecting with 5 GHz band
Press and hold the WPS button for over five seconds
WPS function is enabled and the Status indicator blinks slowly in green.
Perform the WPS connecting procedure on a wireless LAN (Wi-Fi
approximately two minutes
When the setup is succeeded, the Status indicator lights in green.
• Procedure varies by your wireless LAN (Wi-Fi
®
) device.
Connecting with a smartphone using NFC function
NFC is a convenient function with which network name (SSID) and security key (password) can be read. Hold a
NFC compatible smartphone (Android OS device) over the product to connect.
* Devices can be connected to 2.4 GHz SSID when NFC function is used.
Power on the product
Hold the NFC mark of smartphone over the NFC scanning area of the product
When a wireless LAN (Wi-Fi
®
) signal icon is displayed on the screen of the smartphone, the setting is complete.
• Turn on wireless LAN (Wi-Fi
®
) and NFC function of the smartphone in advance.
• Follow the onscreen instructions of the smartphone.
• Operations vary by smartphone.
• "Huawei HiLink" app may be required depending on Android OS version or smartphone model. When a URL for
downloading "Huawei HiLink" app appears, connect referring "■ Connecting with "Huawei HiLink" app".
■ Connecting with "Huawei HiLink" app
Install "Huawei HiLink" app to your smartphone and hold it over the product to connect.
Power on the product
Hold the NFC mark of smartphone over the NFC scanning area of the product
An app for reading NFC tag activates and the URL for downloading "Huawei HiLink" app appears.
• Follow the instructions on the smartphone screen, connect to the scanned URL.
®
• Turn on wireless LAN (Wi-Fi
) and NFC function of the smartphone in advance.
• Operations vary by smartphone.
• If a URL is not displayed, refer to "Connecting with a smartphone using QR code display function" and try connecting.
Tap "INSTALL"
• Check that "Huawei HiLink" app is downloaded.
Tap "OPEN" → "3G/4G wireless routers" → "Later"
Huawei HiLink home screen appears.
• When activating for the first time, "Huawei HiLink" app introduction appears. Follow the onscreen instructions.
Tap "Device disconnected" → "NFC"
Hold the NFC mark of smartphone over the NFC scanning area of the product
When a wireless LAN (Wi-Fi ) signal icon is displayed on the screen of the smartphone, the setting is complete.
* If connecting by holding it over the NFC scanning area of the product fails, refer to "Connecting with a smartphone
using QR code display function" and try connecting.
Connecting with a smartphone using QR code display function
Install "Huawei HiLink" app on your smartphone (Android OS device) which enables auto-connection with the
product by scanning QR code for connection on the bottom surface of the main unit.
* Devices can be connected to 2.4 GHz SSID when QR code display function is used.
■ Installing "Huawei HiLink" app
To use the QR code for connection on the bottom surface of the main unit to connect with a smartphone, install
"Huawei HiLink" app on the smartphone in advance.
Scan the following QR code for Android with QR code reader app of smartphone
• Follow the QR code reader app's instructions to connect to the scanned URL.
"Huawei HiLink" app download (Play Store)
http://consumer.huawei.com/minisite/mobilewifiapp/download.html
Tap "INSTALL"
• Check that "Huawei HiLink" app is downloaded.
* You can search for "Huawei HiLink" app in Google Play
TM
and then download instead of reading QR code.
■ Scanning QR code and connecting with a smartphone
In the app list of your smartphone, tap "Huawei HiLink"
The device selection screen appears.
• When activating for the first time, "Huawei HiLink" app introduction appears. Follow the onscreen instructions.
• Turn on wireless LAN (Wi-Fi
®
) of the smartphone in advance.
Tap "3G/4G wireless routers" → "Later"
Huawei HiLink home screen appears.
Tap "Scan"
Scan the QR code for connecting on the bottom surface of main unit
®
When a wireless LAN (Wi-Fi
) signal icon is displayed on the screen of the smartphone, the setting is complete.
* Connection cannot be established automatically by scanning the QR code of the product with other than "Huawei
HiLink" app. Be sure to use "Huawei HiLink" app.
* If auto-connection fails by QR code scanning, refer to "Connecting via wireless LAN (Wi-Fi
connect.
* For inquiries about "Huawei HiLink" app, contact the developer of the app or from the following homepage.
http://consumer.huawei.com/jp/support/index.htm (Japanese)
Activating Speed Wi-Fi HOME setting tool
Make the product settings from Speed Wi-Fi HOME setting tool on a web browser of a PC etc. connected with the
product via wireless LAN (Wi-Fi
explained here as example.
* Use "SSID1" to use Speed Wi-Fi HOME setting tool via wireless LAN (Wi-Fi
Power on the product
Activate a wireless LAN (Wi-Fi
Activate the web browser and enter "http://speedwifi.home" in the URL entry field
The log-in screen appears.
®
) device.
®
) devices
®
) device can be
Select the language to "English" in 言語 (Language) list and enter "admin" in the user name
®
) device within
and password then select "Login"
• Default login password for Speed Wi-Fi HOME setting tool can be found in the "初回ログインID/パスワー ド (Default log in
ID/Password)" on the bottom of the main unit.
• When you select "Login", the confirmation screen of "The strength of your login password is too low. Please change the
password to avoid potential security issues." appears. When "Change Now" is selected in the confirmation screen, the
password change screen appears to change it soon. After change of password, log in from the Login screen again.
Depending on strength of changed password, the confirmation screen of password change may reappear when you log in.
When "Later" is selected in the confirmation screen, your log-in is done and the Settings or Connection screen of Speed
Wi-Fi HOME settings tool appears.
®
) device within
When you log in to Speed Wi-Fi HOME setting tool successfully, Settings or Connection screen in the Speed Wi-Fi
HOME setting tool appears.
Updating the software
You can set to notify you of update information or update the software automatically with Speed Wi-Fi HOME
setting tool. Download the latest software and update.
■ Notes
• Make sure that the product is connected to the internet before executing the online update.
• IMSI (a subscriber identity recorded on IC card etc.) and IMEI (an equipment identity recorded on IC card
etc.) will be notified to the update server for checking if the update is needed or not for your device before the
update.
• When you failed to check the latest software, retry in a place where the signal condition is better.
• Charge of data communication is incurred when accessing the internet from the product using the data
communication.
• When updating the software is needed, you will be notified on au homepage etc. For details, contact an au shop
or Customer Service Center (157/toll-free). Also, we may send notifications from au to the Speed Wi-Fi HOME
L01 users who need software update so that they can use the Speed Wi-Fi HOME L01 in good condition.
• You are recommended to back up your setting contents before the update.
• If you failed to download the latest software, the Update indicator blinks in red (quick). Retry in a place where
the signal condition is better by pressing and holding the WPS button and Mode button at the same time for
over one second.
• When the software update is failed, the product may become inoperative. If the product becomes inoperative,
bring it to an au shop or PiPit (except a part of shops).
■ Setting to notify you of update information
In the Speed Wi-Fi HOME setting tool, "Settings" → "Online Update"
Turn "Auto Detect" to On
When there is software information, the software information is displayed on the notification screen.
Go on to tap "Update" to download and install the software.
■ Updating the software automatically
Set this feature to ON for automatically updating while the product is not communicating if the latest software is
found.
In the Speed Wi-Fi HOME setting tool, "Settings" → "Online Update"
Turn "Auto Update" to On
■ Updating the software with the WPS button and Mode button
The software cannot be updated automatically during communication. Update manually.
Press and hold the WPS button and Mode button for over approximately one second at the
same time.
The Update indicator blinks in red (slow) and then update starts.
■ Updating the software with the Speed Wi-Fi HOME setting tool
In the Speed Wi-Fi HOME setting tool, "Settings" → "Online Update"
Select "Update"
Check the software update information. If the update is found, downloading starts.
When the download is complete, installation starts automatically.
Checking own phone number etc.
You can check your device information such as phone number or IMEI.
In the Speed Wi-Fi HOME setting tool, "Connection" → "Information"
Device information is displayed.
* Phone call etc. is not available with the product.
* Write down your own phone number in the "契約電話番号 (Contract phone number)" field in the included "保証書
(Warranty) (for main unit)" (Japanese). Keep "保証書 (Warranty) (for main unit)" (Japanese) at hand because the
contract phone number is necessary when making inquiry.
Troubleshooting
Please check the following if problems such as being unable to connect to the Internet remain even after setting
and reading this manual and "取扱説明書 詳細版 (Full Instruction Manual)" (Japanese).
* Signal strength, communication congestion, amount of contents may affect communication status.
■ Internet connection fails.
1. Check that you are inside the service area.
2. Signal reception may be poor. Try again in a place with better reception.
3. Connection destination may be busy at certain time. Wait a while and try again.
4. Activate Speed Wi-Fi HOME setting tool and make sure that the product connects to the Internet correctly.
■ Communication stops intermittently.
1. Signal reception may be poor. Check in a good reception area.
2. Make sure that the product and a PC etc. are correctly connected via wireless LAN (Wi-Fi
cable (sample).
3. When the product and wireless LAN (Wi-Fi
product.
4. When the product and a PC are connected with the Ethernet cable (sample), disconnect the product from
the PC and then reconnect it.
If connection is not established after the above-mentioned steps are performed, disconnect the product
®
)" in this manual and
from the PC, restart the PC and then connect the product again.
■ Communication speed is slow.
1. Signal reception may be poor. Check in a good reception area.
2. Connection destination may be congested. Wait a while and try again.
®
®
) or using Ethernet cable (sample). Steps for wireless LAN (Wi-Fi
) connection are
®
) connection.
®
) device and connect to the product via wireless LAN (Wi-Fi
®
) or the Ethernet
®
) device are connected via wireless LAN (Wi-Fi
®
), restart the
Related accessories
Available periphery devices are as follows.
• Speed Wi-Fi HOME AC Adapter (HWS31PJA)
* The above periphery device can be purchased from au online shop.
http://auonlineshop.kddi.com
®
)
Main specifications
■ Main unit
Dimensions
Approx. 180 (H) × 93 (W) × 93 (D) mm
Approx. 493 g
Weight
LAN port
10BASE-T, 100BASE-TX, 1000BASE-T
USB terminal
Standard-A/USB 2.0
100V - 240V AC, 50/60Hz, 12V DC
Power supply
Wattage
Up to 24 W
Operating ambient temperature range: 0℃ - 40℃
Operation environment
Operating ambient humidity range: 5% - 90%
■ WAN
Compatible Networks
WiMAX 2+, LTE
■ LAN
Compatible Networks
Wi-Fi (IEEE802.11a/b/g/n/ac-compliant)
Frequency band
2.4 GHz (1 - 13ch*), 5 GHz (W52, W53, W56)
WEP: 64 bit/128 bit
Secure Wi-Fi network
WPA-PSK: AES/AES＋TKIP
WPA2-PSK: AES/AES＋TKIP
®
Maximum simultaneous
Wireless LAN (Wi-Fi
): 40 devices (2.4 GHz band: 20 devices / 5 GHz band: 20 devices)/
connections
LAN: 2 devices
*: By default setting, channel can be selected between 1 and 11 ch automatically.
■ Speed Wi-Fi HOME AC adapter
Input power
100 - 240V AC, 50/60Hz, 0.8A
Output power
12V DC, 2A
Dimensions
Approx. 46 (W) × 33 (H) × 91 (D) mm (Cord length: Approx. 2.2 m)
Weight
Approx. 215g
Operating ambient temperature range: 0℃ - 40℃
Operation environment
Operating ambient humidity range: 5% - 90%
■ Ethernet cable (sample)
Approx. 1.5 m
Cord length
Weight
Approx. 32g
Trademarks
• Microsoft
®
, Windows
®
, Windows Vista
®
are trademarks or registered trademarks of Microsoft Corporation in the United States.
®
®
• The official name for Windows is Microsoft
Windows
Operating System.
• Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the United States/other countries.
• Firefox is a registered trademark or trademark of Mozilla Foundation in the United States and/or other countries.
• Google, Android and Google Chrome are trademarks or registered trademark of Google Inc.
• Opera is a trademark or registered trademark of Opera Software ASA. For details about Opera, refer to http://jp.opera.com/.
• Mac, Macintosh, Safari, iPhone, iPod, iPod touch, and iPad are trademarks or registered trademarks of Apple Inc. in the United
States/other countries.
• The trademark "iPhone" is used with a license from Aiphone K.K.
• Wi-Fi
®
, Wi-Fi Alliance
®
, Wi-Fi CERTIFIED
®
, WPA
TM
, WPA2
TM
and the logos are registered trademarks or trademarks of Wi-Fi
Alliance.
• Wii U, Nintendo 3DS and Nintendo DS are registered trademarks or trademarks of Nintendo.
• QR code is a registered trademark of Denso Wave Inc.
• HUAWEI is a registered trademark or trademark of HUAWEI TECHNOLOGIES CO., LTD. in China.
• Other company names and product names referred to in this manual are trademarks and registered trademarks of respective
companies. The
®
marks or TM marks may be omitted in this manual.
For inquiries, call
Customer Service Center
For general information, charge and
For loss, theft or damage
operation information
(toll-free)
Business hours: 24 hours (7 days a week)
From fixed-line phones:
Business hours: 9:00–20:00 (7 days a week)
0077-7-113
From fixed-line phones:
From au mobile phones:
0077-7-111
157
without area code
In case above numbers are not available, call (toll-free)
0120-977-033
Pressing "zero" will connect you to an operator,
after calling "157" on your au cellphone.
0120-977-699
Repair and Delivery Service Center
For loss, theft, damage
(toll-free)
From fixed-line phones/au mobile phones,
0120-925-919
Business hours 9:00-20:00 (7 days a week)
(toll-free)
From au mobile phones:
113
without area code
(except Okinawa)
(Okinawa)
December 2016, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD.