Aube Technologies TH106-A-347S4 Manuale d'uso
Sfoglia online o scarica il pdf Manuale d'uso per Termostato Aube Technologies TH106-A-347S4. Aube Technologies TH106-A-347S4 3. Aube technologies programmable thermostat user manual
Stampa la pagina
Time and day
Set the day
Set the time
Program the
schedule
Skip a period
Select the
operating mode
Periods
Description
This programmable thermostat can be used to control an electric
heating system such as an electric baseboard heater, a radiant ceil-
ing, a radiant floor, a convector, etc.
The thermostat cannot be used with the following:
•
a resistive load greater than 16.7 A
•
a resistive load less than 2 A
•
a system driven by a contactor or relay (inductive load)
•
a central heating system
SUPPLIED PARTS:
•
One (1) thermostat
•
Two (2) 6-32 screws
•
Two (2) solderless connectors
Installation
TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRICAL SHOCK.
THE INSTALLATION MUST BE PERFORMED BY AN ELECTRI-
CIAN.
All cables and connections must conform to the local electrical
code.
Special CO/ALR solderless connectors must be used when con-
necting with aluminum conductors.
Install the thermostat onto an electrical box.
Install the thermostat about 5 feet high, on an inside wall facing
the heater.
Avoid locations where there are air drafts (such as the top of a
staircase or an air outlet), dead air spots (such as behind a
door), or direct sunlight.
Do not install the thermostat on a wall that conceals chimney or
stove pipes.
The thermostat wires are not polarized; either wire can be con-
nected to the load or to the power supply.
NOTE:
Always keep the thermostat's vents clean and unobstructed.
TH106-A-347S4
Temperature
preset buttons
Appears when the
setpoint is displayed
emperature
T
Operating
mode icons
Temperature
preset icons
Heating power
indicator
Temperature
adjustment
buttons
Connect the thermostat wires to the line wires and to the load
wires using solderless connectors for copper wires.
2-wire installation
1.
4-wire installation
2.
Push any excess wire back into the electrical box.
Before installing the TH106 thermostat base, install provided
adapter plate (U-shaped) on 347V electrical box which is bigger
than regular electrical boxes.
NOTE:
If necessary, before re-installing the front component, config-
ure the thermostat (see section 3).
Return power to heating system.
TH106-A-347S4
User Guide
Programmable Thermostat
400-106-011-A
22/1/07
1/3