Auber Instruments WS Series Manuale rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale rapido per Controllore Auber Instruments WS Series. Auber Instruments WS Series 14. Programmable pid temperature controller with dual probe
Anche per Auber Instruments WS Series: Manuale rapido (15 pagine), Manuale di funzionamento e istruzioni (18 pagine), Manuale di funzionamento e istruzioni (18 pagine), Manuale rapido (14 pagine)

4) Smoker generator control output status indicator. When lit, the smoker

generator control output is on. When off, the output is off.

5) Timer status indicator - When lit, right window shows the time passed since

power up. When it is off, right window shows the current temperature detected by

the probe 2.

6) SET Key - For showing current temperature settings, getting into parameters

setting mode and confirming various actions taken.

7) "-" Key - To decrement displayed value when in controller is in the parameter

setting mode. During normal operation, press it to cancel the alarm.

8) "+" Key - To increment displayed value when in controller is in the parameter

setting mode. During normal operation, press it will change the left window from

temperature to display which step the program is at.

9) Time Key - Change the display in right window between current timer and

temperature values.

2. Connecting and operating the controller

Install the sensor.

(Note: If you ordered wall mount sensor instead of free hanging sensor, please see the

separate instruction in the CD for its installation)

The controller is supplied with two probes. The one with the short tip is for measuring the

Figure 2. Back Panel