daltile 1048BRS Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Sega daltile 1048BRS. daltile 1048BRS 20. Professional tile saw

Stampa la pagina
TOOL MAINTENANCE.
●
It is important to keep tools clean and in
good working order. This will result in
optimal performance of the machine.
Always follow the maintenance instruc-
tions for proper tool maintenance.
DISCONNECT TOOLS.
●
It is important to disconnect the power
tool before servicing the equipment.
This should be done when changing
accessories on the machine, changing
blades and for other such things.
REDUCING ACCIDENTAL STARTING OF
●
MACHINE
It is important to be sure that the
switch is in the OFF position
before you plug the machine into
an electrical outlet.
EQUIPMENT ACCESSORIES.
●
It is important that you refer to the
owner's manual for determining what
are the recommended accessories to
use with this type of equipment. Using
accessories that are not recommended in
the owner's manual may increase the risk
of personal injury and/or to people that
are within close proximity of the
machinery.
CHECKING THE EQUIPMENT FOR
●
DAMAGED PARTS.
It is important to inspect the power
tool before using it to check for
damaged parts. Any part of the
machinery that is damaged should be
checked carefully to determine whether
or not it should be used and whether or
not it can function properly for its
intended use.
PAGE 6 DALTOOL 1048BrS OPERATING MANUAL V02/2008R1
DALTOOL
®
 SAFETY
It is important to check all the moving
parts of the machinery for proper align-
ment and /or possible binding.
All broken or damaged parts should
be properly repaired or replaced. If
these parts are not repaired or replaced
the proper operation of the machine
could be negatively affected.
Damaged saw blades should be
replaced immediately.
BLADE ROTATION DIRECTION AND
●
FEED ROTATION.
Always feed work into a blade in the
direction of rotation. The blade should
always be installed so that the rotation
is in the direction of the arrow imprinted
on the side of the blade and the blade
guard.
NEVER LEAVE A TOOL RUNNING
●
UNATTENDED – TURN POWER OFF
It is important never to leave a tool
running when not in use. Also never
leave the tool until the blade has come to
a complete stop. It is important to always
turn the power tool OFF when leaving
the work area or when a cut is finished.