daltile 828 BrS Manuale operativo - Pagina 12

Sfoglia online o scarica il pdf Manuale operativo per Sega daltile 828 BrS. daltile 828 BrS 16. Tile saw

UNPACKING AND SETTING UP

Unpack the tile saw and inspect

for any damaged parts.

Install the legs in the sockets at the under

side of the water container and fasten with

the knobs. Markings show the right

position.

Level the tile saw by adjusting the

legs in the sockets and make sure its

stable.

Release the transportation lock.

By loosening the knob the saw head can

be positioned at the desired height.

The saw head is tightened by a spring and

may accidentally jump up when the knob

is loosened.

PAGE 12 DALTILE828 BrS OPERATING MANUAL V02/2004R1

Transportation Lock

Operating the water pump without a sufficient

supply of water may result in pump damage.

Place the plug in the drain of the water

container.

Fill the container with water until the

water pump is completely submerged.

Before connecting the machine make sure that:

the line voltage corresponds with the data

on the machine's specifications plate,

there is a grounded power supply,

the extension cord's meets criterea as

mentioned in the table on page 10.

The motor is equiped with a thermal safety

switch for protection against an overload. When

the motor gets overheated, the switch falls back

into its initial position and can only be switched

on again after the motor has cooled down.