2bfirst Cadillock Alarm Manuale di installazione e istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Allarme auto 2bfirst Cadillock Alarm. 2bfirst Cadillock Alarm 20.

Preparation: Selection of the installation point

Switch off the engine and open the bonnet (or any other access to

the car battery). Make sure that the ignition has been switched off

along with all electricity consumers.

If the car battery has a cover, open it and then follow the installa-

tion instructions.

NOTE:

If any electrical cable connections are attached to the car battery,

we recommend the installation of the Cadillock

ized repair shop.

The Cadillock

next to it. What is important is to make sure that the selected instal-

lation point for the Cadillock

• the cable length of the Cadillock

positive pole of the car battery;

• the vehicle's positive cable reaches the pole of the Cadillock

Alarm;

• the black ground cable of the Cadillock

tive pole of the car battery;

• the power connection cable of the alarm siren is sufficient to

attach the siren to a suitable point made of metal and to connect

it to the connection cable of the Cadillock

PLEASE OBSERVE:

The adhesive strength of the adhesive tapes is much weaker at low

temperatures (< 15°C). Therefore only attach the adhesive tapes

when the adhesive surface on the vehicle as well as the adhesive

tapes themselves are in a temperature range of > 15°C.

Alarm can generally be attached to the car battery or

alarm fulfils the following:

Alarm is sufficient to reach the

Alarm reaches the nega-

Alarm main device.

Alarm by a special-