ADDER View Secure Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore ADDER View Secure. ADDER View Secure 20. Adderview secure

Making connections

Connections to the AdderView Secure unit do not need to follow the precise

order given in this user guide, although if one or more systems must be hot-

plugged, connect these after all other connections have been made.

IMPORTANT: All rear panel connectors are clearly marked, however, take great

care not to cross connect any links or devices. You are recommended to connect

all of the input and output links within one channel before proceeding to the

next channel.

Note: In order to minimise signal emissions, you are strongly recommended to

use good quality shielded cables throughout and to fit ferrite cores at each end

of every cable.

Connections to computer systems

To connect a keyboard and mouse link

1 Wherever possible, ensure that power is disconnected from the unit and the

host computer(s) to be connected.

2 At the rear panel of the unit, choose the appropriate channel group (1 to 4)

and connect a USB link cable (square type-B plug) to the socket marked

3 Attach the other end of the USB link cable to a vacant USB socket of the

appropriate host computer (this will most probably require a rectangular

type-A USB plug).

Note: If the smart card reader is fitted and used, its signals will also be

presented to the computer(s) via this common USB link.

5 V

2 . 0

To connect an audio link

1 Wherever possible, ensure that power is disconnected from the unit and the

host computer(s) to be connected.

2 At the rear panel of the unit, choose the appropriate channel group (1 to 4)

and connect an audio link cable to the socket marked

3 Attach the other end of the audio link cable to the speaker socket of the

appropriate system.

5 V

2 . 0