3onedata 1200 Series Manuale di installazione rapida - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione rapida per Convertitore multimediale 3onedata 1200 Series. 3onedata 1200 Series 3.
Stampa la pagina
1.
100M Ethernet fiber port
2.
100M Ethernet fiber port indicator (FX-ACT)
3.
10M/100M Ethernet copper port TP1
4.
10M/100M
Ethernet
(TP1-ADD)
5.
Power supply indicator (POWER)
6.
10M/100M Ethernet copper port TP2
7.
10M/100M
Ethernet
(TP2-ADD)
8.
5VDC Terminal block for power input
9.
Wall Mounting lug
10.
220VAC/DC power input outlet and switch
11.
Terminal block of -48VDC power supply input
12.
Reserved
【Mounting Dimension】
Unit: mm
Model I
Model II
Model III
copper
port
indicator
copper
port
indicator
【Wall-mounted Device Mounting】
Step 1
Step 2
Note Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
Place the device on the wall as reference or
reference installation dimension; mark 2 bolt
positions on the wall.
Hang the device on the labeled wall; align the bolt
to the labeled position, then screw the bolt to
enhance stability, installation ends.
【Wall-mounted Device Disassembling】
Step 1
Device power off.
Step 2
Hold the equipment steady and unscrew the screw
on the wall
Step 3
Take out the device, disassembling ends.
Note before powering on:
Power ON operation: First insert the power supply
terminal block into the device power supply interface,
and then plug the power supply plug contact and power
on.
Power OFF operation: First, remove the power plug,
and then remove the wiring section of terminal block.
Please pay attention to the above operation sequence.
【Power Supply Connection】
5VDC power supply
Model I provides 1 DC round head for power supply input and
support 5VDC power supply.
220VAC/DC power supply
Model II provides 1 AC outlet with switch for power supply
input and support 220VAC/DC power supply.
-48VDC power supply
Model III provides 3 5.08mm pitch terminal block for power
input, supports -48DC power supply. The pin definition as
follows:
PIN
1
2
Definition
GND
-48VDC+
【Checking LED Indicator】
The device provides LED indicators to monitor the device
working
status
with
a
comprehensive
3
-48VDC-
simplified