Conair BodyBenefits BMS9PC Manuale di istruzioni - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per Massaggio Conair BodyBenefits BMS9PC. Conair BodyBenefits BMS9PC 6. Heated massaging back system
Stampa la pagina
OPERATING INSTRUCTIONS
The Body Benefits™ Heated Massaging Back System with Pulsating Massage and Sound is designed
to be used in your home, office or automobile. We have provided an AC adapter, which allows you to
enjoy this product at home or in the office by plugging it into a 120 volt outlet. In addition, you can
experience a soothing massage in your automobile by plugging the DC car adapter into the cigarette
lighter. For your safety, please use only the adapters provided with this massager. Elastic straps are
attached to the seat which allow you to securely fasten the massager to most any automobile seat
or chair.
This massager has been designed for ease of operation. To create your own custom massage, follow
these easy steps: With all the slide switches on the hand controller in the "OFF" position, connect the
power cord to the hand controller. In an automobile use the DC car adapter; at home or office use the
120 Volt AC Adapter. There are 5 switches on the hand controller.
The TOP 4 SWITCHES control the vibrating motors:
1st Switch
2nd Switch
3rd Switch
4th Switch
Each slide switch has an "OFF" position and 3 massage strength settings: "LO" and "HI" pulsating
massage, and "VIB": steady vibration. When a motor is activated, the corresponding L.E.D. lights to
indicate the same. Try each motor setting to create the custom massage you desire.
The BOTTOM SWITCH is the ON/OFF heat control. Slide the switch to the right to activate
the heat in the middle section of the back. The heat L.E.D. lights when the feature is activated.
Please note: Activate the heat option only while the Back Massaging System is in use.
Do not "preheat" the massager. After using, return all switches to the "OFF" position,
and disconnect power before storing.
PULSATING MASSAGE
For an intense massage, this unit offers the option of a pulsating massage; the motors turn on and off
to create the feel of pulsation.
To utilize this option:
1) Select either "Low" or "Hi" on any of the 4 independently activated motors. The motors will start
turning on and off for an intense massage.
2) For added customization, there is a dial marked "Pulse Intensity" located on the right side of the
hand controller which controls the frequency of the pulse feature when it is in the pulse mode. To
increase the frequency of pulse, move the dial upward. To decrease the speed of the pulsation, turn
the dial fully downward.
3) For a steady massage or vibration, select "Vib" on all four-massage zones.
LEFT SHOULDER
RIGHT SHOULDER
LOWER BACK
SEAT