AIRTUG TT-M-EA-3 Istruzioni per il montaggio e il funzionamento - Pagina 4
Sfoglia online o scarica il pdf Istruzioni per il montaggio e il funzionamento per Macchine agricole AIRTUG TT-M-EA-3. AIRTUG TT-M-EA-3 4. Trailer tugs
Stampa la paginaCAUTION:
*
Read, study and understand all warnings and operating instructions prior to use.
* When working on the tug:
* Put the tug up on blocks to get the drive wheels off the ground before beginning any work.
* Do not allow anyone to stand directly in front of or behind the tug during testing.
* Make sure the Power switch is off.
* Use well-insulated tools.
* RUNAWAYS - Some conditions could cause the tug to run out of control. Disconnect the motor, or
jack up the tug, and get the drive wheels off the ground before attempting any work on the motor
control circuitry.
* HIGH CURRENT ARCS - Electric vehicle batteries can supply very high power, and arcs can occur
if they are short circuit. Always turn off the battery circuit before working on the motor control circuit.
* Wear safety glasses, and use properly insulated tools to prevent short circuit.
* Do not overload this tug beyond the rated capacity.
* This tug is designed for use only on hard level surfaces capable of sustaining the load.
* No alterations to the tug shall be made.
* Electronic components may be damaged if exposed to water! This is not covered under warranty.
*
Failure to heed these warnings may result in personal injury and/or property damage.
TT-M-EM-3 & TT-M-EA-3 Assembly & Operating Instructions / 12-1-20
www.airtug.com
Airtug® /
/ 216-941-9781 / www.airtug.com
4