dams Benotto BEN50002 Istruzioni per il montaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni dams Benotto BEN50002. dams Benotto BEN50002 2.

Do not tighten bolts fully until you have completed assembly.

Please note the fixing screws are located in their fixing points if not found in the parts bag.

Should you require any assistance in assembling your goods please contact customer services

on 0151 548 7111 between 9am/4:30pm.

Please unzip and remove all the parts from within the base.

Self tapping screw

Lips

Please make sure the lips at the top of the leg are

located under the edge of the frame. If you have

diﬃculty locating the lips into the correct position,

loosen the self tapping screws either side of the leg

ﬁtment, which will release the frame from the

underside of the seat to create the small gap

needed to slide the lips under the frame. Connect

the leg and then re-tighten the screws.

Adjustable feet

WARNING

●

DO NOT USE THIS CHAIR AS A STEP LADDER.

● USE THIS PRODUCT FOR SEATING ONE PERSON AT A TIME ONLY.

● DO NOT USE THIS CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE FIRMLY SECURED.

● AT LEAST EVERY 6 MONTHS ,CHECK ALL BOLTS, SCREWS AND KNOBS TO BE SURE THEY ARE TIGHT.

● IF PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USING THIS PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORISED PARTS.

● FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.

A×4

Lips