dams Elev82 Touch EVTB-1600 Manuale di istruzioni per il montaggio - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni dams Elev82 Touch EVTB-1600. dams Elev82 Touch EVTB-1600 13. Back-to-back desks
Stampa la pagina
18
Step 18
Your desk is now ready to be connected to the mains outlet.
Before you proceed with operating your new desk it is recommended that you perform a full
reset of the controller to calibrate the height of each leg.
This can be done using the following steps;
Press both buttons at the same time for 3 seconds.
•
Continue pressing the buttons until both columns are in lowest position.
•
Keep pressing the buttons until control box makes 1 beep.
•
When control box makes 1 beep, it is confirmed that reset has been completed and buttons
•
can be released.
Now the desk is operational.
•
If the desk is disconnected by accidently pulling out the plugs at the control box, motors,
•
handset, main power source or system status reach overload, overheat etc. then the desk
must be reset.
If the desk is powered off intentionally at the main power switch, then the desk does not
•
need to be reset.
Operating the desk
Press this button, to operate the desk for upwards running.
Press this button, to operate the desk for downwards running.