Conairphone CID402 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Telefono cordless Conairphone CID402. Conairphone CID402 6. Type i caller id phone with clock radio

Stampa la pagina

SETTING UP CID402

Plug in the AC power cord before setting up the

unit.

DO NOT CONNECT the telephone line cord to the

wall outlet until the Caller ID setup has been

completed.

To Set the Time/Date

1. The display shows '1/01, 12:00 AM' and the month

digits will be blinking. If the display does not appear

this way, press and hold [MENU] for 2 seconds.

2. Press [

] or [

] to select the month digits.

3. Press [DELETE] to confirm and the date digits will

blink.

4. Press [

] or [

] to select the date digits.

5. Press [DELETE] to confirm and the hour digits will

blink.

6. Press [

] or [

] to select the hour digits.

7. Press [DELETE] to confirm and the minute digits

will blink.

8. Press [

] or [

] to select the minute digits.

9. Press [DELETE] to confirm and the 'AM' will blink.

10. Press [

] or [

] to select 'PM'.

11. Press [DELETE] to confirm and set the alarm clock,

or press [CALL BACK] to reset the time/date.

To Set the Alarm Clock

1. The display shows '12:00 AM, ALARM' and '12' will

be blinking.

2. Repeat the above procedures of time setting to set

the alarm.

3. Press [DELETE] to confirm and set the contrast of

display, or press [CALL BACK] to reset the alarm.

To Set the Contrast of Display

1. The display shows '--3--, CONTRAST' and '3' is

blinking.

2. Press [

] or [

] to adjust the contrast level (from

1 to 5, default is 3).

3. Press [DELETE] to confirm and set the language.

To Set the Language

1. The display shows '-ENGLISH-, LANGUAGE'.

2. Press [

] or [

] to change language to French or

Spanish.

3. Press [DELETE] to confirm and set the area code,

or press [CALL BACK] to reset the language.

To Set the Area Code

1. The display shows '---, AREA CODE' and the first

digit '-' is blink.

2. Press [

] or [

] to enter the area code.

3. Press [DELETE] to confirm and go to the next digit.

4. Repeat steps 2 and 3 until 3-digit area code is set.

5. Press [DELETE] to confirm and the unit will resume

to show real time clock. Or press [CALL BACK] to

reset the area code.

Notes:

• You can skip the current setting and jump to the

next setting by pressing [MENU] once. But the

current setting will not be updated.

• If user has not pressed any key within 20 seconds,

the unit will return the Real Time Clock mode.

Adjustable Backlight

You can adjust the backlight to normal or high level by

using the DIMMER HI/LO switch located on the left

side of the unit.

NOTE: The backlight will turn off when there is no AC

power.

TELEPHONE OPERATION

Receiving a Call

When you receive a call, the phone rings. The display

will show the name and the caller's telephone number,

if you want to talk to the caller:

1. Pick up the handset to answer the call.

2. At the end of the call, return the handset to the

cradle.

NOTE: If your radio is on, it will automatically be

silenced when the handset is removed from the cradle.

The radio will resume playing when the handset is put

back in the cradle.

Dialing a Call

NOTE: This unit features an illuminated dial keypad

light for dialing in a darkened room, and this unit always

shows the real time clock even if it is at the off-hook

mode.

1. Pick up the handset and wait for a dial tone.

2. Press the keypad for the telephone number you wish

to dial.

TELEPHONE FEATURES

Tone/Pulse Switch

Set switch to your type of service. If you don't know

whether you have tone or pulse:

1. Put the switch on TONE.

2. When you have a dial tone, press any key on the

keypad. If the dial tone stops, leave it on TONE. If

not, change the setting to PULSE.

Receiver Volume Control

The Receiver Volume Control is located on the side of

your handset. This enables you to adjust the receiver

volume on your telephone handset from normal to high

for a more comfortable listening level.

Ringer Off/Low/High

This unit features a harmonic dual tone ringer that can

be adjusted from a loud (HI) to a soft (LO) sound level.

When you don't want to be disturbed, slide the switch

to the OFF position. You can still make outgoing calls

without being disturbed by incoming calls.

Mute

To talk to someone on your end of the phone without

the caller hearing your conversation, press and hold

the [MUTE]. Release the [MUTE] to return to your

telephone conversation.

Last Number Redial

Automatically redials the last number called. If the

number was busy or unanswered:

a. Hang up the HANDSET on the base (or depress

the hook switch or [RESET]).

b. Lift the HANDSET (or release the hook switch).

c. Press [REDIAL].

Pause

Whether you have Tone or Pulse service, you can insert

a 3.6 seconds PAUSE into the dialing or storing of a

number into memory in order to access custom and

telebanking services, long distance, etc. Press

[REDIAL] at the desired point in the number. Press

[REDIAL] again if an additional 3.6 seconds is needed.