DAN DRYER Loki Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Asciugatrice DAN DRYER Loki. DAN DRYER Loki 10.

INSTALLATION

• Make sure the main breaker is turned off. Installation must be carried out by a

qualified person in accordance with standards applicable in the country where

the equipment is to be installed.

• Place template against the wall at desired height (see mounting height recommendations)

and mark location of (4) mounting holes and the wire service entry.

1. Remove the (2)

cover-mounting screws and

the cover.

3. Fix the base plate of the hand

dryer to the wall with the screws

supplied with the unit.

5. Connect supply wires to terminal block:

2. Place the template on the wall

at the desired location. Drill (4)

holes as indicated.

4. Insert the power cord

through the hole in the bottom.

Fasten with the retaining clip.

Connections:

A. Connect live wire (coloured red, brown, or white) to

the terminal block marked "L"

B. Connect neutral wire (coloured black or blue) to

terminal block marked "N"

C. Connect the ground wire (coloured green or green

and yellow) to the screw marked "

NOTE

Colours of live and neutral wires depend

on voltage of supply service.