ADDER AdderLink LPV154T Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Estensore ADDER AdderLink LPV154T. ADDER AdderLink LPV154T 18. Signage video extender

Connections

Connections to the AdderLink LPV154T and 150R modules do not need to

follow the precise order given in this user guide although it is recommended

that you do not apply power to the transmitter until all other connections have

been made.

To connect video from the source PC system

1 Connect the supplied video cable to the socket labelled

transmitter.

2 Attach the other end of the video cable to the appropriate VGA video

output socket on the host system.

3 Optionally, connect a local monitor to the socket labelled

on the

From VGA video

socket on the host

system

4 3

2 1

Video output socket

for connection

to optional local

video display

or for use when

cascading multiple

transmitters

DDC information about the video displays is not sent from the receiver modules. Instead,

the transmitter holds a standard set of DDC details which are suitable for most video

displays. If the standard details are not suitable, temporarily connect the transmitter (using

the

port) directly to the video display that is to be emulated and power on the screen

and the transmitter. In cascaded installations, only the initial transmitter needs to be taken

through this procedure.

If the DDC information is different to that already held, the red indicator (adjacent to the

socket) will flicker rapidly for 2 to 3 seconds while the new information is stored.

LINK4

If a problem occurs while attempting to harvest DDC information, the red indicator on the

transmitter will show a number of distinct flashes. Note the number of flashes in case you

need to contact technical support, but otherwise retry the procedure.

Switches: Switch 4 is used to

reset the transmitter unit (see

Resetting the transmitter unit).

All other switches are reserved

for future use.