Concept Perugini TT 200 Libro di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Libro di istruzioni per Macchine agricole Concept Perugini TT 200. Concept Perugini TT 200 16. Flail mowers

ALWAYS MAKE SURE THE TRACTOR IS TURNED OFF, P.T.O

IS DISENGAGED AND MACHINE IS MADE SAFE

Attaching the machine to the Tractor

Concept Perugini Flail toppers can be linked up to any tractor with a category 1

or 2 three point linkage.

Read the tractor's instruction manual before attaching attempting to attach the

machine to the tractor.

•

Adjust the width of the tractor arms to match the lower brackets on the

machine

•

On a ﬂ at surface reverse the tractor up to the machine

•

Firstly attach the lower links and do the necessary adjustments to limit

sideways movement

•

Lengthen and attach the top link in order to have the machine parallel to the

ground once attached

•

Remember to ﬁ t all the locking pins and that the machine is safely secured

to the tractor

On the PT the top link bracket is provided with a hole and a slot to attach the

tractor's top link. It is important that during transport the top link is secured via the

hole and during work the slot is used. Failing to follow these instructions could

result in serious damage to the headstock sliding mechanism and to injury.

The ET comes with a ﬁ xed headstock but has 2 options as to where to attach the

3 point tractor linkage, this is to oﬀ er a ﬁ xed oﬀ set option. To attach the machine

to the tractor proceed as previously described but choose the desired brackets,

either to have the machine directly behind the tractor or oﬀ set.

If the ET is attached with in position

A then the machine sits behind the

tractor as a normal ﬁ xed ﬂ ail mower.

If the machine is linked in position B

then the ET will be oﬀ set by 30 cm.