Elite Acoustics A1BR8 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Mini altoparlante portatile Elite Acoustics A1BR8. Elite Acoustics A1BR8 4. Compact portable rechargeable mini-pa speaker with bluetooth
Stampa la pagina
1.
Battery Switch [26] is set to Connect. (Battery Switch is a built in circuit breaker to
preserve battery life.)
2.
Make sure the SPEAKER VOLUME [3] control is down before you turn the POWER [25]
on.
3.
Connect the input of your microphone to the MIC IN [18]. Or you can connect a ¼" line
input from an instrument [15]. Connect an additional mono or stereo [20].
4.
Turn on the POWER [25] switch
5.
Connect device to Bluetooth® [12]
6.
Turn on your source signal(s) and adjust the volume on the source signal for normal
operation. Note if you are using an iPhone or iPad via Bluetooth®, set the volume on
your device about halfway. Maximum volume will distort.
7.
Adjust the SPEAKER VOLUME [3] to a comfortable level.
8.
Turn up LEVEL [16] until there is a solid green light showing "signal" at desired level,
without a red "peak" light, indicating too much signal.
9.
For USB charging of your source device, use USB Port [24]
Power LED:
BLUE [1]: Indicate unit is ON
+48V LED [2]: Indicates Phantom Power is on
Monitor Output Controls
Speaker Volume [3]: Control speakers' volume level
Mono [4]: Changes speaker output to Mono sound
Equalizer [6]: Adjust Speaker High, Mid, and Low Frequency response
Peak LED [5]: RED indicate Signal Clip
Signal LED [5]: GREEN indicate Signal
Aux Input/Level [7]: Connect audio source with 1/8" jack from MP3/CD player
Effects Controls
Effects Mix [8]: Amount of effect being applied to Input
Rate/Decay [9]: Controls the duration of the effect
Effects Knob Selector [10]: Select effect of choice
EFX Bypass [11]: Turn effects on or off (When LED is on, the effects are turned off)
Channel 1
EFX Send Level [13]: How much output effect is being send out
+48V [14]: Phantom Power control
Line In [15]: 1/4" TRS inputs
Level [16]: Gain level control
Mute [17]: Mute channel
Mic In [18]: XLR for Microphone Input
Channel 2/3
Level [19]: Gain level control
Left/Right Input [20]: 1/4" TRS Input
EFX Send Level [21]: How much output effect is being send out
Monitor Output: Connect with extra speakers/monitors
Output Source [22]: Controls Channel 1 direct output
Main Output [23]: XLR Output
BLUETOOTH® FUNCTION
•
To turn ON/OFF Bluetooth® function
PRESS/HOLD down MODE button for approximately 5 seconds
•
To pair device to the speaker system
Bluetooth® needs to be turned ON
QUICK TAP the MODE button once
Both LEDs will flash at the same time
Both Flashing LED: indicate Bluetooth ® is ready to be paired
Flashing Blue LED only: indicate Bluetooth® is connected
QUICK START