Anybus Communicator CAN PROFINET IRT 2.32 Manuale di rete - Pagina 12
Sfoglia online o scarica il pdf Manuale di rete per Server Anybus Communicator CAN PROFINET IRT 2.32. Anybus Communicator CAN PROFINET IRT 2.32 20. Interface
Anche per Anybus Communicator CAN PROFINET IRT 2.32: Manuale di installazione (2 pagine)
Stampa la paginaNetwork Configuration
4.2.3
Ethernet Configuration
To change the IP settings for a device, double-click on the entry in the main window or right-click
on it and select Configuration.
Fig. 7
Ethernet configuration
Enter static IP settings as required, or select DHCP if using dynamic IP addressing.
You can add a name for the device in the Hostname field. Only characters a–z, A–Z, 0–9 and _
(underscore) are allowed.
The default password for changing IP settings is blank (no password). If a password has been
set for the device you must enter it to be able to change the settings.
To set a new password, check the Change password box and enter the current password in
the Password field, then enter the new password in the New password field.
Click on Set to save the new settings. The device will reboot automatically.
®
Anybus
X-gateway
™
PROFINET
Do not enable DHCP if there is no DHCP server available on the network.
For security reasons the default password should always be changed.
®
IRT (2.32) Interface Network Guide
10 (18)
SCM-1202-028-EN 1.1