ADDER ADDERLink INFINITY 4000 Avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Avvio rapido per Router di rete ADDER ADDERLink INFINITY 4000. ADDER ADDERLink INFINITY 4000 2.

Stampa la pagina
Connections
AdderLink
3
1
2
Reset
switch
Reserved
Primary
SFP port
TX unit
4
12V
3A
1
2
Power
Reserved
in
USB
Primary
video in
To perform a manual factory reset
A factory reset returns ALIF4000 unit to its default configuration.
1 Power on the ALIF4000 unit.
2 Use a long narrow implement (e.g. a straightened-out paper clip) to press-and-hold the recessed reset button on the front panel
for roughly ten seconds, until the status indicator turns blue (Note: alternating red/green indications will occur during the ten second
period while the button is still pressed).
3 Release the reset switch. The indicator will remain blue for a short while (less than ten seconds) while ALIF4000 unit configures
itself and should then change to green if all connections are correct; or orange if one or more of the video, USB and/or network
links are missing.
Note: If you are performing a factory reset and intend to disconnect the power immediately after the reset, you must wait at least 30
seconds after you have released the reset button for it to complete the process.
Secondary fiber link (using 10GbE SFP modules) - direct link or via suitable switch
Primary fiber link (using 10GbE SFP modules) - direct link or via suitable switch
TRANSMIT
4 0 0 0
4
Secondary
SFP port
1
2
optical
IN
OUT
AUX
Secondary
Audio
Reserved
video in
out
Audio
in
AdderLink
4 0 0 0
2
3
Reset
Microphone
Reserved
switch
Headphones
USB
RX unit
1
2
12V
4
3A
5
Power
USB
Secondary
in
display
Primary
Audio
display
RECEIVE
1
1
2
3
4
optical
OUT
Reserved
Secondary
SFP port
Primary
out
SFP port
A d
d e r
L i n
k