Anyload EB300 Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Bilance Anyload EB300. Anyload EB300 18. Weighing scale

Function activation

To enable Auto Tare, follow these instructions:

1. Press

. Display will show "PLUPro". Press

2. Press

meaning:

0—

1—

3. Press

to confirm. Press

Function use

1. Place the recipient or box over the plate. Scale will operate the tare function and display will show 0

and tare symbol will be on.

2. Place the object or objects inside the recipient or box. Display will show net weight, deducting the tare

(recipient/box weight).

3. Remove all objects from the plate. Display will cancel tare and set to 0.

4. To weigh again, repeat the same procedure. It can be used indefinitely without pressing any button.

7.4 Current weighing

Switch on the scale by pressing

If there is an object on the plate, display will show the object's weight; in case the weight is low, the

scale might activate zero start up and return the 0 value..

Press the UNIT key to select the required weighing UNIT.

EB300 User Manual

Display will show in the last position one digit, in accordance with the following ,

Disable function.

Enabled Function.

to return to weighting mode

button. Display will show zero value after a few seconds.

several times, until display shows "AUT-t"

Page 8 of 18