Anyload T15 Series Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Bilance Anyload T15 Series. Anyload T15 Series 12.

3. Scale will back to accumulation mode after

shows the total accumulated numbers and weight.



Press

FUNCTION

POWER SELECTION

1. 6V4Ah rechargeable battery

2. 110V or 220V AC/DC adaptor

POWER CONSUMPTION

1. Approximately DC 17mA (Scale)

2. Approximately DC 37mA (Scale + Display backlight)



When the low battery symbol is on, it means the power of scale is low needs to change the battery

or plug-in the adaptor to recharge the battery.



To the right of the display is a LED to indicate the status of battery charging. When the scale is

plugged into the mains power the internal battery will be charged. If the LED is green the battery

is being charged. If it is red indicates the battery is increasing the charge level. Continue to

charge overnight for a complete re-charge.

CHAPTER

When scale is on and at zero and stable, long press

then release the key, LCD sill shows the battery voltage for 3 seconds ten back to weighing mode.

2.2 AUTO BACK LIGHT SETUP

When scale is on and at zero and stable,

long press TARE

key enter the auto

back light setup, use ZERO

or disable, then press PRINT

confirm and back to weighing mode.

key to exit accumulation mode and move back to weighing mode.

ADVANCED FUNCTIONS

key to enable

key to

ZERO

key around 3-5 seconds(beeper sounds)