Anyload T15E v2 series Manuale dell'operatore - Pagina 3

Sfoglia online o scarica il pdf Manuale dell'operatore per Bilance Anyload T15E v2 series. Anyload T15E v2 series 12. Pallet jack scale

Introduction

Thank you for choosing Anyload NPS Series Pallet Jack Scale. Anyload pallet jack

scales serve as a normal pallet jack while also performing the function of a scale

with the added feature of a built-in indicator as an integral part of the scale's

body. The indicator is featured with auto calibration, auto-off / auto-idle, auto

charging control function, counting function, low voltage indication and RS232

communication port. The NPS series pallet jack scales are made of alloy steel

and are widely used in warehouses as an effective means of weighing a pallet.

This manual provides the user's guide in using the product, safety, installation

and operation of the scale. In order to use the scale properly, please read this

manual carefully before use. If you have any problem with scale, please contact

your supplier. You can secure a copy of this manual at our website at

www.anyload.com.

1) Please keep the scale in a cool dry place. Do not store it at high temperature.

2) Do not allow any liquids to come into contact with the scale. If necessary

wipe the scale with a dry soft cloth.

3) Avoid objects impacting with the scale. Do not drop loads onto the scale or

subject the weighing pan to any strong shock loads.

4) The load placed on the weigh pan must not exceed the maximum weighing

capacity of the scale.

5) If the scale is not going to be used for some time, please clean it and store it

in a plastic bag in dry conditions. A desiccant sachet may be included to prevent

any moisture build up.

1. Avoid operating the scale in direct sunlight or drafts of any kind.

2. If possible avoid connecting the scale to ac power outlet sockets which are

adjacent to other appliances to minimize the possibility of interference affecting

the performance of the scale.

3. Remove any weight that might be on the weigh pan before the scale is

switched on and avoid leaving weight on the pan for long period of time

4. All goods weighed should be placed in the centre of the weigh pan for

accurate weighing. The overall dimensions of the goods being weighed should

not exceed the dimension of the weigh pan.

2 |

ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator