Anyload PS805 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Anyload PS805. Anyload PS805 8. Thermal receipt printer
Anche per Anyload PS805: Manuale d'uso (13 pagine)

Stampa la pagina

3.2 Cleaning the Paper Scraps

After using the printer for a period of time, paper scraps will

accumulate around the printer head area. Paper scraps felt into

the gears might result in damaging the gear system. Therefore,

regular clean up is required.

1. Please make sure the power cord is unplugged and the

interface cable is disconnected.

2. Use a soft brush to clean up paper scraps around the cutter

blade.

3. Open the top cover, remove the paper roll from the printer.

4. Use air brush to blow away the paper scraps on the gear

system. Use soft brush to remove paper scraps around the

printer head.

Note:

* Recommend to do the paper scraps clean up twice a month. If

using low quality thermal paper roll and/or using the printer very

often, can process the clean procedure more frequently.

3.3 Handling the Printer

Use both hand to hold the base

Never lift by holding

the top cover

Chapter 4

Operating the Printer

4.1 Turn the Printer On or Off

After the power cable are plugged in and connected with the

power adapter. The printer can be turn on or off by the switch at

the back.

On/Off Switch

4.2 Keys & Indicators on Front Panel

Red Light

PS805

Green Light

On/Off-line: Switch on or off by pressing the [SEL] key once.

On-line: Green indicator light is on.

Off-line: Green indicator light is off. Printer will not accept any

data. Press [LF] key will run the paper.

Power On: Red indicator light is on.

Power Off: Red indicator light is off.

[SEL] Key

[LF] Key