Concoa 452 Series Manuale di istruzioni per l'installazione e il funzionamento - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e il funzionamento per Controllore Concoa 452 Series. Concoa 452 Series 13.

DESCRIPTION OF PRODUCT

This singleMstage pressure regulator is equipped with a heating element intended to vaporize a liquid

sample and maintain it in the gaseous state for chromatographic analysisV Further it provides a

positive heat source to prevent freeze up of the regulatorV This product is designed for use in explosive

atmospheresV It is intended for above ground use and is moisture resistantV For more information

refer to the Section "Certiﬁcations and Compliances" in this manualV

This equipment will perform in conformity with the description contained in this manual and

accompanying labels and1or inserts when installedU operatedU maintainedU and repaired in accordance

with the instructions providedV It is the responsibility of the user to determine the suitability of this

product for the gas service and applicationV It is also the responsibility of the user to install this product

in accordance with National Electrical Codes and any local ordinancesV

This equipment must be checked periodicallyV Improperly working equipment should not be usedV

Parts that are brokenU missingU wornU or distorted should be replaced immediatelyV This equipmentU

or any of its partsU should not be altered without prior written approval by CONCOGV The user of this

equipment shall have the sole responsibility for any malfunction that results from improper useU faulty

maintenanceU damageU improper repairU or alteration by anyone other than CONCOG or a serviced

facility designated by CONCOGV

Service to this product should only be performed by CONCOG or an authorized CONCOG agentV

Requests for service may be made through CONCOG CUSTOMER SERVICE at 0MX88M227M84'5V

Written requests may be made using CONCOG's FGX number at 0M'7'M422M5027 or CONCOG's

EMMGIL at infoHconcoaVcomV

CONCOG accepts no responsibility for damage or injury if this product is modiﬁed in any wayV

CONCOG assumes1accepts no liability or responsibility for damage to individuals or equipment that

may occur when using this productV

In the event of equipment failureU call the CONCOG Customer Gssistance Line@ 0MX88M227M84'5j FGX@

'7'M422M5027j EMmail@ infoHconcoaVcomV Please be prepared to provide the model number and serial

number of the equipment involvedU in addition to some details regarding its applicationV This would

include inlet and outlet pressuresU ﬂow rateU environmental conditionsU and gas serviceV

Basic safety precautions must be followed to reduce the risk of ﬁreU electrical shockU and injuryV

Connect the Vaporizing Regulator to the correct line voltageV The product nameplate identifies

what voltage it is wired forV

SERIOUS DAMAGE TO THE PRODUCT AND WILL VOID ANY WARRANTY.

PRODUCT OPERGTES GT HIGH TEMPERGTURESV DO NOT TOUCH WHEN ONV GLLOW

SUFFICIENT TIME TO COOL BEFORE HGNDLINGV

Do not use in areas where large amounts of dust are presentV

If product appears damaged in any wayU do not use and request service from CONCOGV

Do not attempt to operate the Vaporizing Regulator with the electrical box cover offV

Comply with precautions listed in CVGVGV Pamphlet PM0U Safe Handling of Compressed Gases

in ContainersV

CONNECTION TO AN INCORRECT VOLTAGE CAN CAUSE

M5M