Anysecu F1 Manuale d'uso
Sfoglia online o scarica il pdf Manuale d'uso per Ricetrasmettitore Anysecu F1. Anysecu F1 2. Professional fm transceiver
Stampa la paginaUser`s Manual
■Safety Warning before use
Do not use the walkie talkie in the explosive environments ( such as gas , dust , steam ,
etc . ) in sunlight directly for a long time , or put it near by the heating appliances.
Do not place walkie talkie in extremely dusty ,moisture and water splashing places , and
do not put in uneven surface.
Maintenance can only be carried out by professional and technical personnel , Please do
not disassemble by oneself.
■Get familar to your Radio
■Basic operation
◆Start up and shutdown/ Volume adjustment
Press the [power on/off/volume] button about 3-4 seconds until you hear "du" sound
and screen display the channel No.. After turning on the power, press the [power
on/off/volume] button about 3-4 seconds until you hear "du" sound and screen
display is off, means the power is turned off.
◆Make call and answer call
Press the [PTT] button and speak to the mic as normal volume, keep the mic away
from your mouth about 3-5cm will get good audio, the TX icon (down right of the
screen) is on. release [PTT] button to receive call, the RX icon (up right of the
screen) is on.
◆Volume set : press (left) Volume- or Volume+(right) to decrease or increase the
volume.
◆Channel set : Press (UP)CH+ or (Down) CH- to choose the channel.
◆Scan: long press CH- or CH+, radio will start scan from channel - or + , if there
are signal, scan will stop until signal off will continue scan; long press CH+ or
CH- stop scan.
(if available channel<2, can not scan. )
◆TOT
Time-out-timer function to avoid one talk too long, it can set by programming from
30-300seconds, ex-work set is off.
◆Low voltage prompt: When the voltage is lower than working voltage, radio
make"de~de~"alarm and battery icon shining to remind the user to charge the
battery in time.
◆Keypad lock : long Press (left) Volume- or Volume+(right) to lock the front 4
key, long press left or right key again to unlock the 4 keys.
◆VOX Voice-operated transmitting: when voice-operated transmitting is activated,
transmitting can be executed just by shouts without pressing PTT key.
(with headset must set the VOX level for radio hear the voice clearly, the amplified
RX voice from headset/microphone may active TX by VOX too )
When power on the radio, shortly press power key to start/ stop VOX function, VOX
must be set on by programming in advance.
◆Setting QT/DQT: If user set the QT/DQT on one channel, user is able to ignore
other calls on the same channe
When users set QT/DQT on one channel, only receive the same QT/DQT can radio
open the squelch.
In the same way, only other people set QT/DQT the same as your scan they receive
your call
Professional FM transceiver