AnyTone AT-6666 Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale AnyTone AT-6666. AnyTone AT-6666 13.
Stampa la pagina
HOW TO USE YOUR RADIO
OFF/ON Radio
11
Turn VOL clockwise to switch on the radio, the radio emit a beep.
When the LCD displays frequency or channel, the radio is on.
21
Turn VOL anti-clockwise to switch off the radio, the radio is OFF
when hear Ka Ta from the switch.
Volume Control
When the radio is turned on, turn VOL clockwise will increase the
volume, turn VOL anti-clockwise will reduce the volume. The LCD
displays VOL: XX (XX stands for the volume level, total 1-36 levels).
Note: Adjust the volume during communication to get suitable level.
RF Power Control
When the radio is transmitting, turn PWR outer shaft to adjust power.
Turn it clockwise to increase power, anti-clockwise to reduce power.
RF Gain Control
When the radio is receiving, turn RFG inner shaft to adjust RF gain.
Turn it clockwise to increase gain, anti-clockwise to reduce gain.
SQUELCH Control
When the radio is standby, turn SQ outter shaft clockwise to adjust
squelch level. The LCD displays SQ: XX. (XX stands for the squelch
level, total 1-36 levels).
SSB Clarifier control
When the radio is transmitting or receiving, turn CLAR inner shaft to
adjust USB/LSB TX or RX frequency. Turn it clockwise to increase
frequency, anti-clockwise to reduce frequency.
Channel Selection
When radio in channel mode, turn channel knob to select desired
channel. Clockwise to increase, anti-clockwise to reduce channel.
Note: In channel display mode, each press【PUSH】key will
increase the frequency by 10 times of channel step size.
Frequency control
In frequency mode, press
11
frequency for present channel.
21
When the frequency is flashing, turn CH clockwise to increase
frequency, anti-clockwise to reduce frequency.
31
When the frequency is flashing, press
frequency step size.
KEYPAD FUNCTION
【MEM】
Using memory channel:
11
Short press
【MEM】to enter memory channel, turn CH to
choose memory channel.M1-M6, Total 6 memory channels.
21
Short press
【MEM】again to exit memory channel mode.
Store/Delete memory channel:
11
Store memory channel:
When the radio is not in memory channel mode, choose the
channel to be stored, and hold【MEM】enter storage mode,
the channel number flashes, Turn Channel switch to choose
the location to be stored (M1-M6), then hold【MEM】until the
flashing channel number disappear, the storage is done.
【PUSH】key, then you can adjust
【PUSH】again to adjust
5