3onedata NP5000 Series Manuale di installazione rapida - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione rapida per Server 3onedata NP5000 Series. 3onedata NP5000 Series 4. Serial server
Stampa la pagina
1.
100M copper port
2.
Reset button
3.
Terminal block 1 for power input
4.
Power indicator
5.
Running indicator
6.
Copper port connection indicator
7.
Serial port transmission data indicators
8.
Serial port receiving data indicators
9.
Lugs
10.
RS-485/422/232 DB9 serial port
11.
RS-485/422/232 RJ45 serial port
12.
Grounding screw
13.
Terminal block 2 for power input
14.
Console port
【Mounting Dimension】
Unit: mm
Model I, Model II
Model III, Model IV
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【Wall-mounted Device Mounting】
Model I, Model II
Step 1
On the wall of device mounting, place the device on
the wall for reference or refer to the mounting
dimension to mark two screw positions.
Step 2
Nail M4 screws on the wall and keep 2mm
interspace reserved.
Step 3
Hang the device on two screws and slide
downward, then tighten the screw to enhance
stability, mounting ends.
Model III, Model IV
Step 1
Adopt M3 screw to install the left/right mounting
board on the device backboard.
Step 2
On the wall of device mounting, place the device on