Duerkopp Adler 506 Manuale di istruzioni per l'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Macchina da cucire Duerkopp Adler 506. Duerkopp Adler 506 17.
Anche per Duerkopp Adler 506: Manuale di istruzioni per l'installazione (8 pagine)
Stampa la pagina
3. Bobbin winder
2
3
1
4
5
6
Reeling on the spool thread
–
Place yarn reel on reel stand.
–
Thread the thread through the holes 1 in the reel stand.
–
Pass the thread through the tension discs of tensioner 2.
–
Pass the thread through the tension discs of tensioner 3 of the reel.
–
Pass the thread through the slot in guide 4.
–
Pass the thread through the hole 7 in the empty reel.
–
Place the empty reel on the bobbin shaft 8.
The pin 10 of the bobbin shaft must fit into the hole 7.
–
Pass the thread through the star 10 and clamp it in the tensioner 11.
–
Use the thread clipper 6 to cut off the end of the thread.
–
Raise the thread layer 5.
The bobbin winder is switched on and the winding process begins.
–
As soon as the reel is full the thread layer 5 springs back into
position and the winding process is terminated.
7
8
9
10
11
15