Duerkopp Adler 550-16-23 Manuale di istruzioni per l'installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Macchina da cucire Duerkopp Adler 550-16-23. Duerkopp Adler 550-16-23 8. Sewing lamp led
Anche per Duerkopp Adler 550-16-23: Istruzioni per il montaggio (2 pagine)
Stampa la pagina
4.
Electrical Connection
4.1
Checking the Nominal Voltage
2
5
ATTENTION !
Any work on the electrical equipment of the sewing unit should
be carried out exclusively by the properly qualified electricians or by
the
properly qualified staff!.
The mains plug must be pulled out.
It is absolutely necessary to respect the enclosed manufacturer's
instructions for the step motor.
ATTENTION !
The nominal voltage, stated on the type plate, should agree with the
local voltage!
1
Use the terminal bar 3 and the transformer 6 in the control cabinet for
adapting to the local voltage.
–
Screw off the cover 1 at the switch cabinet.
–
Loosen the screws 2 and 5 and remove the guard 4.
–
Check the arrangement of the connections on the terminal bar 3
and on the transformer 6.
(See circuit diagrams 9870 550033 B sheet 1 to 3)
–
If necessary, change the connections according to the local
voltage.
–
Re-assemble the guard 4 and screw on with the screws 2 and 5.
–
Re-assemble the cover 1 on the switch cabinet and screw on.
4
2
6
5
4
2
3
5