3onedata GW1104 Series Manuale di installazione rapida - Pagina 4
Sfoglia online o scarica il pdf Manuale di installazione rapida per Porta d'ingresso 3onedata GW1104 Series. 3onedata GW1104 Series 4. Modbus gateway
Stampa la pagina
LED
Indicate
Description
No data or abnormal data is being
OFF
TX(1-4)
transmitted through serial port.
Blinking
Serial port is transmitting data.
Serial port is not receiving data or
OFF
receiving data abnormally
RX(1-4)
Blinking
Serial port is receiving data.
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's user name and password in the
login window as shown below.
Step 4
Click "OK" button to login to the WEB interface of
the device.
Notes:
The default IP address of the device Internet access is
"192.168.1.254".
The default user name and password of the device are
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M Copper Port
10/100Base-T(X) self-adapting
RJ45 port
Serial Port
3IN1
RS-485/422
with isolation or RS-232 RJ45
interface
Indicator
Power
indicator,
connection indicator, Serial port
transmission and receiving data
indicator
Power supply
Input power supply
9~48VDC or 12~48VDC
Access terminal block
2-Pin or 3-pin 5.08mm pitch
terminal blocks
Power consumption
No-load
2.94W@12VDC
Full-load
Working environment
Working temperature
Storage temperature
Working humidity
Protection grade
RJ45
interface,
terminal
blocks
indicator,
Running
Copper
port
3.00W@12VDC
-40~75℃
-40~85℃
5%～95% (no condensation)
IP30(metal)